I have 125' of Belden 9913F7 coax left over from an install.
RG-8 type large diameter, medium stiffness. (definitely not mic cable but I have wrapped stiffer types than this on stage before)
There's enough to make a cross-stage antenna run and a shorter for the near side antenna.
I do not have connectors but normally use the UHF solder type (ham radio) with pigtail strain relief adaptors to BNC
$95 shipped to within US (-can't squeeze this into a small box unfortunately)
RG-8 type large diameter, medium stiffness. (definitely not mic cable but I have wrapped stiffer types than this on stage before)
There's enough to make a cross-stage antenna run and a shorter for the near side antenna.
I do not have connectors but normally use the UHF solder type (ham radio) with pigtail strain relief adaptors to BNC
$95 shipped to within US (-can't squeeze this into a small box unfortunately)