Reply to thread

Message

<blockquote data-quote="Steve Anderson" data-source="post: 8268" data-attributes="member: 630">Hi guys,Hoping someone here might have the answer to this, and yes I asked this in the &#039;other&#039; place too.I&#039;ve just received a bunch of multipin connectors from Ten47 along with the appropriate crimp tool and locator turret.As you can see from the pics below, it&#039;s a little ambiguous as to what setting to use on the tool. The tool itself says20 AWG - Sel no 422 AWG - Sel no 324 AWG - Sel no 2But the pin locator turret says 20 AWG - Sel no 5(and extrapolating; 22-4, 24-3)Turret has part numbers for Veam pins which don&#039;t line up with Ten47&#039;s part numbers for pins.Does anyone actually *know* what setting I&#039;m supposed to use?And yes, I can ask supplier, however I&#039;d like to get a start on terminating these this weekend, as I have some time. Supplier is Scotland, and I&#039;m in Australia, which means I won&#039;t have answer until Tuesday at earliest (or overnight monday).Here&#039;s a bunch of pics showing reason for my confusion.Oh, and if it&#039;s helpful, Radial Engineering use the Ten47 Tourline connectors for their custom shop stuff.Cheers![edit: have no idea why the pictures are upside down - assuming they are for everyone - happened on other forum too, but when clicked on they are right way up... maybe it&#039;s a mac thing][ATTACH]158393[/ATTACH][ATTACH]158394[/ATTACH][ATTACH]158395[/ATTACH][ATTACH]158396[/ATTACH]</blockquote>

[QUOTE="Steve Anderson, post: 8268, member: 630"] Hi guys, Hoping someone here might have the answer to this, and yes I asked this in the 'other' place too. I've just received a bunch of multipin connectors from Ten47 along with the appropriate crimp tool and locator turret. As you can see from the pics below, it's a little ambiguous as to what setting to use on the tool. The tool itself says 20 AWG - Sel no 4 22 AWG - Sel no 3 24 AWG - Sel no 2 But the pin locator turret says 20 AWG - Sel no 5 (and extrapolating; 22-4, 24-3) Turret has part numbers for Veam pins which don't line up with Ten47's part numbers for pins. Does anyone actually *know* what setting I'm supposed to use? And yes, I can ask supplier, however I'd like to get a start on terminating these this weekend, as I have some time. Supplier is Scotland, and I'm in Australia, which means I won't have answer until Tuesday at earliest (or overnight monday). Here's a bunch of pics showing reason for my confusion. Oh, and if it's helpful, Radial Engineering use the Ten47 Tourline connectors for their custom shop stuff. Cheers! [edit: have no idea why the pictures are upside down - assuming they are for everyone - happened on other forum too, but when clicked on they are right way up... maybe it's a mac thing] [ATTACH=CONFIG]158393.vB5-legacyid=7744[/ATTACH][ATTACH=CONFIG]158394.vB5-legacyid=7745[/ATTACH][ATTACH=CONFIG]158395.vB5-legacyid=7746[/ATTACH][ATTACH=CONFIG]158396.vB5-legacyid=7747[/ATTACH] [/QUOTE]

Verification