Reply to thread

Message

<blockquote data-quote="Avi Goldberg" data-source="post: 60142" data-attributes="member: 1658">Re: Itech addressMy guess is you meen that you get amps from clients that have static IP addresses on them and don&#039;t have the DHCP feature enabled?If that&#039;s the case then on the HD series you have a Networking menu on the front panel DSP that you can just enable DHCP and let the amp ask for an IP address so SA will find the itech on its own. If you have older, non HD series amps, you need to make sure you have firmware over version 2.0. Now let system architect find the amp first using READDRESS DEVICES from the TOOLS tab. Then it will ask you if you want to enable DHCP, when you press yes then the amp will reboot and the next time it&#039;s up it will try to find a DHCP server and get an IP address from it. I&#039;m pretty sure you already have a DHCP server on your local worshop network unless you have a special configuration for some reason.You need to take into consideration that you might be deleting user configuration of the static IP that was there before.</blockquote>

[QUOTE="Avi Goldberg, post: 60142, member: 1658"] Re: Itech address My guess is you meen that you get amps from clients that have static IP addresses on them and don't have the DHCP feature enabled? If that's the case then on the HD series you have a Networking menu on the front panel DSP that you can just enable DHCP and let the amp ask for an IP address so SA will find the itech on its own. If you have older, non HD series amps, you need to make sure you have firmware over version 2.0. Now let system architect find the amp first using READDRESS DEVICES from the TOOLS tab. Then it will ask you if you want to enable DHCP, when you press yes then the amp will reboot and the next time it's up it will try to find a DHCP server and get an IP address from it. I'm pretty sure you already have a DHCP server on your local worshop network unless you have a special configuration for some reason. You need to take into consideration that you might be deleting user configuration of the static IP that was there before. [/QUOTE]

Verification