Reply to thread

Message

<blockquote data-quote="Uwe Riemer" data-source="post: 131493" data-attributes="member: 394">Re: New Midas M32 ConsoleDo you use panning on vocals and horns? Otherwise a mono group would do it, total 8 subgroups ( buses ) and 4 FX sends, leaves you 4 prefader sends to work withFor mixing Video feed at the same time, using subs on aux or groups or matrix adds another level of complication IMO2 sends as conventional prefader sends and one mix over subgroups, I would try to avoid thatOne way to do it:DL16s/251 connected to X32R, AES50 split to M32, gains on X32R controled by M32, monitor mix is done completely in the Rack, which also means someone has to do it ( set channel EQs, comps, reverbs... )Another way:Send the groups from M32 back to the Rack together with important channels and look into the options of the P16 bus and P16-M, if some of the musicians would accept wired IEMsWith careful analysis of everyone needs it may workFor further questions on the system I recommend the Behringer forum <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />~<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":-)" title="Smile&nbsp; &nbsp; :-)"&nbsp; data-smilie="1"data-shortname=":-)" />~:smile: , super nice and knowledgeable guys thereUwe</blockquote>

[QUOTE="Uwe Riemer, post: 131493, member: 394"] Re: New Midas M32 Console Do you use panning on vocals and horns? Otherwise a mono group would do it, total 8 subgroups ( buses ) and 4 FX sends, leaves you 4 prefader sends to work with For mixing Video feed at the same time, using subs on aux or groups or matrix adds another level of complication IMO 2 sends as conventional prefader sends and one mix over subgroups, I would try to avoid that One way to do it: DL16s/251 connected to X32R, AES50 split to M32, gains on X32R controled by M32, monitor mix is done completely in the Rack, which also means someone has to do it ( set channel EQs, comps, reverbs... ) Another way: Send the groups from M32 back to the Rack together with important channels and look into the options of the P16 bus and P16-M, if some of the musicians would accept wired IEMs With careful analysis of everyone needs it may work For further questions on the system I recommend the Behringer forum :)~:-)~:smile: , super nice and knowledgeable guys there Uwe [/QUOTE]

Verification