Reply to thread

Message

<blockquote data-quote="Shawn Keck" data-source="post: 137540" data-attributes="member: 4132">Re: Sound &amp; Stage PowerHere is what we use from Indu...Cam feeder from source to Indu Cube Distro:3 Phase cam in with cam pass through which breaks out to six CS50 outputs<a href="http://www.indu-electric.com/catalog/26/?PAGEN_1=4" target="_blank">http://www.indu-electric.com/catalog/26/?PAGEN_1=4</a>018 CubeThen 6/4 to where we need itBreaks out into their lunch box series CS50 in with CS50 pass trough which breaks out to six breakered 20A Edison<a href="http://www.indu-electric.com/catalog/29/" target="_blank">http://www.indu-electric.com/catalog/29/</a>FB-F5-PT-03Cheaper option that is still breakered is the Floor Box Series:<a href="http://www.indu-electric.com/catalog/30/" target="_blank">http://www.indu-electric.com/catalog/30/</a>FB-F5-PT-03 TailCheapest option is construction spider boxes off Craigslist...but that can be kinda ghetto!Many hotels have either the CS50 or L14-50 connectors so Indu built us a few L14-50 male to CS50 Female adapters. Between those, one CS50 to bare wire tail and cam, we have yet to have a problem getting power anywhere.Cam is readily available, 6/4 can be had from any United Rentals in any city, and the distros are the same in the construction industry if you need more. We don&#039;t have a set rig that needs the same power set up every time so for us it was a no brainier.</blockquote>

[QUOTE="Shawn Keck, post: 137540, member: 4132"] Re: Sound & Stage Power Here is what we use from Indu... Cam feeder from source to Indu Cube Distro: 3 Phase cam in with cam pass through which breaks out to six CS50 outputs [URL]http://www.indu-electric.com/catalog/26/?PAGEN_1=4[/URL] 018 Cube Then 6/4 to where we need it Breaks out into their lunch box series CS50 in with CS50 pass trough which breaks out to six breakered 20A Edison [URL]http://www.indu-electric.com/catalog/29/[/URL] FB-F5-PT-03 Cheaper option that is still breakered is the Floor Box Series: [URL]http://www.indu-electric.com/catalog/30/[/URL] FB-F5-PT-03 Tail Cheapest option is construction spider boxes off Craigslist...but that can be kinda ghetto! Many hotels have either the CS50 or L14-50 connectors so Indu built us a few L14-50 male to CS50 Female adapters. Between those, one CS50 to bare wire tail and cam, we have yet to have a problem getting power anywhere. Cam is readily available, 6/4 can be had from any United Rentals in any city, and the distros are the same in the construction industry if you need more. We don't have a set rig that needs the same power set up every time so for us it was a no brainier. [/QUOTE]

Verification