Reply to thread

Message

<blockquote data-quote="Timo Ulkuniemi" data-source="post: 121252" data-attributes="member: 1978">Re: Speaker on Stick build with large budgetHelloJust stumbled across this conversation - I thought I share pictures of my setup - subs are selfmade copies of D&amp;B Q-sub - top cabinets are JBL EVO - heavily modified&nbsp; and passive since one amp burnt leaving charcoal where pc-board used to be... they have dual 13 + horn and are about 20kg a piece - easy enough to get on/off pole alone.As you can see, there is tiltable socket for pole - so I can aim it to audience - original radiation angle is 110x110 if I remember correctly. I also switched horn from middle to top because too often these things are staying too low, when in shallow rooms, so I rather have horn on top. Amplification is two iNuke 6000 DSP-version for tops and something else for subs - whatever I have at moment...First picture is without grille in my garden - three last pictures are in a old restaurant in Helsinki ( there is a tree groving inside and throught ceiling... ) last year end of May at school is out party.All speakers need fresh paint - I know !Board is X32 and is located behind the stage - in one of the pictures my Airport Express UFO can be seen hovering above guitar amp. Place was packed - some 400 people and we never run out of power - all control with iPad mini - walking around - sitting at some table - changing places.First time in my life I had chance to mix &quot;Apache&quot; - performed by The Rapiers - what a performance....</blockquote>

[QUOTE="Timo Ulkuniemi, post: 121252, member: 1978"] Re: Speaker on Stick build with large budget Hello Just stumbled across this conversation - I thought I share pictures of my setup - subs are selfmade copies of D&B Q-sub - top cabinets are JBL EVO - heavily modified and passive since one amp burnt leaving charcoal where pc-board used to be... they have dual 13 + horn and are about 20kg a piece - easy enough to get on/off pole alone. As you can see, there is tiltable socket for pole - so I can aim it to audience - original radiation angle is 110x110 if I remember correctly. I also switched horn from middle to top because too often these things are staying too low, when in shallow rooms, so I rather have horn on top. Amplification is two iNuke 6000 DSP-version for tops and something else for subs - whatever I have at moment... First picture is without grille in my garden - three last pictures are in a old restaurant in Helsinki ( there is a tree groving inside and throught ceiling... ) last year end of May at school is out party. All speakers need fresh paint - I know ! Board is X32 and is located behind the stage - in one of the pictures my Airport Express UFO can be seen hovering above guitar amp. Place was packed - some 400 people and we never run out of power - all control with iPad mini - walking around - sitting at some table - changing places. First time in my life I had chance to mix "Apache" - performed by The Rapiers - what a performance.... [/QUOTE]

Verification