Hi
I have a set of older Danish-produced D-pac am2 speakers which contain 1 *15" (18sound 15w1200) and 1 * 2" (Beyma cp850nd) mounted on a large custum built horn, about 500mm deep. They are crosed at about 780hz.
However, the problem is that the 15w1200 is no longer available and have to change a few of them. Had been nice to possibly switch to neo magnet.
Have the following ideas:
18sound:
15mb1000
15ntlw3500
15nw9300
new 15nmb1000?
Beyma:
15p80nd
18p80fe
B & C
15ndl88
Other suggestions? and pluses and minuses on the following units for a 2 way Top, that almost always runs 3 way with sub.
Sincerely
Kim Anker Hansen
I have a set of older Danish-produced D-pac am2 speakers which contain 1 *15" (18sound 15w1200) and 1 * 2" (Beyma cp850nd) mounted on a large custum built horn, about 500mm deep. They are crosed at about 780hz.
However, the problem is that the 15w1200 is no longer available and have to change a few of them. Had been nice to possibly switch to neo magnet.
Have the following ideas:
18sound:
15mb1000
15ntlw3500
15nw9300
new 15nmb1000?
Beyma:
15p80nd
18p80fe
B & C
15ndl88
Other suggestions? and pluses and minuses on the following units for a 2 way Top, that almost always runs 3 way with sub.
Sincerely
Kim Anker Hansen