Topic: New Tactile Control for Behringer/Midas X/M32 Rack

Vincent Rohr

New member
May 20, 2021
1
0
1
28
Germany
Hi, this is Vince from MakePro X!

We are soon launching a fully modular, multi-purpose and multi-target, professional-grade controller system. If you decided for the X32 rack edition, you made your choice because of the compact form factor. And if you like the power of the X32 but not the large size of the full-blown X32 console, we believe we have a very interesting suggestion for you.

We have not been active in this forum yet – however we're longtime X32 connaisseurs and we believe that X and M32 mixers evolved to play a major role in location live mixing, but also in many other applications, such as streaming, project studios, with bands and artists as well as installed / AV applications and we stumbled upon a lot of related posts here. :)

And while X32/M32 rack mixers pack a whole lot of awesome features into a compact form factor, sometimes they lack intuitive and professional control. Especially when touch screens are not appropriate or just not good enough.

Have you ever thought about what being able to make up your own personalized control surface for your rack would enable you as a user to do with it? Since we are developers and manufacturers ourselves, we thought we should improve on what Behringer and Midas have created and make them truly professional tools with high end and customizable tactile controls.

We provide protocol-open, fully customizable and scalable hardware solutions which can control the X32 / M32 via OSC as well as many other control targets at the same time.

So for instance, in a live situation you could set up your channel levels, pans, fx, gains, headphone- and sub-mixes for the musicians, then at the press of a button switch over to your recording settings. Then, for instance, press another button to control the lights of your show via DMX. All with one personalized and self-configured device that you can pack up in five minutes after the show ended.
And it doesn’t end there: Once you are at your home studio or rehearsal space: Use it as a DAW controller, control your synthesizers during jam sessions...whatever you can think of!

Our hardware is ready and our GLUE software is currently in late beta status. Now we are looking for a few Pilot Users who like to join in pioneering a new level of control and access to their X32 / M32 Rack consoles.

If you think that is you, then apply for joining our Pilot User group!


Registration is open until May 28th 2021


Follow THIS LINK to a web page where we provide exclusive insight into our system and our pilot program for X32 / M32 rack Mixers. We are very much looking forward to hearing about your personal thoughts and ideas!
 

Attachments

  • X32_frontal_1_v1_small.jpg
    4.4 MB · Views: 31