Reply to thread

Message

<blockquote data-quote="Karl Lies" data-source="post: 105211" data-attributes="member: 5327">Feature requestReceived my X32, S16 a few days ago. Been going through testing&nbsp; etc...Been giving the desk a pretty hard eye but have to say that, thus&nbsp; far, I&#039;m impressed! A potential feature came to mind the other night (it&nbsp; actually comes from working with a very large A&amp;H iLive system).&nbsp; Could the desk be programmed so that you could solo a particular element&nbsp; in an audio path (dyn, eq, gate etc...) in a &quot;simulated mode&quot; so that&nbsp; you could make adjustments, and hear the effect on the solo buss,&nbsp; without actually engaging it into the main&#039;s?For example, in the&nbsp; middle of a show, I want to search for a particular resonant frequency&nbsp; that I&#039;m hearing from some particular source and notch it down a little&nbsp; bit but I dont want the house to hear me sweeping the parametric through&nbsp; that channel. On the iLive system there&#039;s a &quot;Select&quot; button that you&nbsp; can press and hold and that will take the output of the processing&nbsp; element that you&#039;re messing with and put the output on the PAFL buss&nbsp; without actually engaging it into the main&#039;s.In my example, if I&nbsp; had a button that I could&nbsp; press that would allow me to solo the EQ and&nbsp; sweep through it, listening on the solo buss and hearing the sweep&nbsp; without having this go to the mains as well, I could isolate the freq I&nbsp; want to notch, adjust a notch and then, when I&#039;m happy with it, actually&nbsp; engage the change into the mains (or whatever mixbus).This can&nbsp; be very handy allowing you to tweak something without it affecting what&nbsp; I&#039;m sending to the house until I get it dialed in the way I want it.</blockquote>

[QUOTE="Karl Lies, post: 105211, member: 5327"] Feature request Received my X32, S16 a few days ago. Been going through testing etc...Been giving the desk a pretty hard eye but have to say that, thus far, I'm impressed! A potential feature came to mind the other night (it actually comes from working with a very large A&H iLive system). Could the desk be programmed so that you could solo a particular element in an audio path (dyn, eq, gate etc...) in a "simulated mode" so that you could make adjustments, and hear the effect on the solo buss, without actually engaging it into the main's? For example, in the middle of a show, I want to search for a particular resonant frequency that I'm hearing from some particular source and notch it down a little bit but I dont want the house to hear me sweeping the parametric through that channel. On the iLive system there's a "Select" button that you can press and hold and that will take the output of the processing element that you're messing with and put the output on the PAFL buss without actually engaging it into the main's. In my example, if I had a button that I could press that would allow me to solo the EQ and sweep through it, listening on the solo buss and hearing the sweep without having this go to the mains as well, I could isolate the freq I want to notch, adjust a notch and then, when I'm happy with it, actually engage the change into the mains (or whatever mixbus). This can be very handy allowing you to tweak something without it affecting what I'm sending to the house until I get it dialed in the way I want it. [/QUOTE]

Verification