Reply to thread

Message

<blockquote data-quote="Matthew McDaniel" data-source="post: 106977" data-attributes="member: 5077">Re: X32 DiscussionI&#039;ve been following this thread for quite some time and have learned a great deal from everyone.&nbsp; I have an issue with connecting a P16M to an S16, and I am assuming I am missing something in the routing.&nbsp; I&#039;ve routed multiple channels&#039; direct outs and a pair of aux outs to the P16.&nbsp; The AES50 Outputs for 33-40 and 41-48 are routed to the P16 1-8 and 9-16, respectively.&nbsp; When connected direct to the x32, the channel direct outs as well as the auxes or mix busses that I&#039;ve routed to the P16 work fine.&nbsp; However, if I connect the P16 direct to the S16, I lose the feeds from the auxes and/or mixbusses that were routed to the P16.&nbsp; I always seem to be able to monitor the channel direct outs whether the P16 is connected to the x32 or S16, but I lose auxes, mixbusses, etc if I connect via the S16.</blockquote>

[QUOTE="Matthew McDaniel, post: 106977, member: 5077"] Re: X32 Discussion I've been following this thread for quite some time and have learned a great deal from everyone. I have an issue with connecting a P16M to an S16, and I am assuming I am missing something in the routing. I've routed multiple channels' direct outs and a pair of aux outs to the P16. The AES50 Outputs for 33-40 and 41-48 are routed to the P16 1-8 and 9-16, respectively. When connected direct to the x32, the channel direct outs as well as the auxes or mix busses that I've routed to the P16 work fine. However, if I connect the P16 direct to the S16, I lose the feeds from the auxes and/or mixbusses that were routed to the P16. I always seem to be able to monitor the channel direct outs whether the P16 is connected to the x32 or S16, but I lose auxes, mixbusses, etc if I connect via the S16. [/QUOTE]

Verification