Reply to thread

Message

<blockquote data-quote="Alec Johnson" data-source="post: 116782" data-attributes="member: 6840">Re: How to restore desk setup into V2.01 firmwareI had the same thing happened to me with the &quot;WRONG FILE VERSION&quot;&nbsp;This is what I did that fixed it for me.If you open the file you saved from the X32&nbsp; with TextEdit on a Mac, [ATTACH]153162[/ATTACH] if you look at the first line at the top of you you this on your old X32 saved file. Now if you save you save your settings with the new firmware V2.01&nbsp; and open it up you will see that the first line at the top is not the same. [ATTACH]153163[/ATTACH] Now look at the old back file that you could not open on the X32 and copy everything underneath the first line, and paste it into the new file that you made with the new firmware V2.01 from the X32&nbsp; after you copy everything underneath the first line in the old file, [ATTACH]153166[/ATTACH] and paste into the new file that you made with X32 with the new firmware on it. It should look like something like this when its all done. [ATTACH]153164[/ATTACH] Now to save the file back on to your USB drive and put it into the text to and it&#039;s like load from USB and every thing should be back to work was before you updated the firmware. I hope this helps you out.</blockquote>

[QUOTE="Alec Johnson, post: 116782, member: 6840"] Re: How to restore desk setup into V2.01 firmware I had the same thing happened to me with the "[COLOR=#333333]WRONG FILE VERSION" This is what I did that fixed it for me. If you open the file you saved from the X32 with TextEdit on a Mac, [/COLOR][ATTACH=CONFIG]153162.vB5-legacyid=9455[/ATTACH] if you look at the first line at the top of you you this on your old X32 saved file. Now if you save you save your settings with the new firmware V2.01 and open it up you will see that the first line at the top is not the same. [ATTACH=CONFIG]153163.vB5-legacyid=9456[/ATTACH] Now look at the old back file that you could not open on the X32 and copy everything underneath the first line, and paste it into the new file that you made with the new firmware V2.01 from the X32 after you copy everything underneath the first line in the old file, [ATTACH=CONFIG]153166.vB5-legacyid=9459[/ATTACH] and paste into the new file that you made with X32 with the new firmware on it. It should look like something like this when its all done. [ATTACH=CONFIG]153164.vB5-legacyid=9457[/ATTACH] Now to save the file back on to your USB drive and put it into the text to and it's like load from USB and every thing should be back to work was before you updated the firmware. I hope this helps you out. [/QUOTE]

Verification