Reply to thread

Message

<blockquote data-quote="Daniel McAllister" data-source="post: 123846" data-attributes="member: 2431">Possible bugHi,I came across what I think is a bug during a dress rehearsal this evening. I doubted myself at first, because it&#039;s quite an unusual set-up, but I&#039;ve triple checked and can&#039;t see why this isn&#039;t working...Several input channels with a pre fader send (at unity) to a linked bus (15 &amp; 16 in case it makes a difference!) That bus goes to LR, and is assigned to DCA2. Then, the AUX2 channel has the input set in the config as Bus 15, fader for this channel is at unity. Then that channel has a post fader send to Bus 11. Only Bus 15 &amp; 16 have DCA2 assigned - nothing else has.Problem is, although the expected signal is received in the AUX2 channel (obviously only when the DCA is up), it doesn&#039;t pass to Bus 11 at all.Basically, it&#039;s to get several radio mic channels into a chorus group which can be faded up on the DCA, and for them to only pass to Bus 11 (feeding monitors in the orchestra pit) when they&#039;re being used in the FOH mix. Obviously ideally I&#039;d just send Bus 15 straight to Bus 11, but you can&#039;t - hence going back to an input channel first.Anyone fancy double-checking?! I vaguely remember someone reporting a similar issue many many pages ago, but I thought that had been fixed in a firmware update (board is running 2.04).Thanks.</blockquote>

[QUOTE="Daniel McAllister, post: 123846, member: 2431"] Possible bug Hi, I came across what I think is a bug during a dress rehearsal this evening. I doubted myself at first, because it's quite an unusual set-up, but I've triple checked and can't see why this isn't working... Several input channels with a pre fader send (at unity) to a linked bus (15 & 16 in case it makes a difference!) That bus goes to LR, and is assigned to DCA2. Then, the AUX2 channel has the input set in the config as Bus 15, fader for this channel is at unity. Then that channel has a post fader send to Bus 11. Only Bus 15 & 16 have DCA2 assigned - nothing else has. Problem is, although the expected signal is received in the AUX2 channel (obviously only when the DCA is up), it doesn't pass to Bus 11 at all. Basically, it's to get several radio mic channels into a chorus group which can be faded up on the DCA, and for them to only pass to Bus 11 (feeding monitors in the orchestra pit) when they're being used in the FOH mix. Obviously ideally I'd just send Bus 15 straight to Bus 11, but you can't - hence going back to an input channel first. Anyone fancy double-checking?! I vaguely remember someone reporting a similar issue many many pages ago, but I thought that had been fixed in a firmware update (board is running 2.04). Thanks. [/QUOTE]

Verification