Log in
Register
Home
Forums
New posts
Search forums
What's new
Featured content
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
What's new
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Pro Audio
Junior Varsity
X32 Discussion
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="John Koepke" data-source="post: 124317" data-attributes="member: 7691"><p>Re: Help with S16 issue</p><p></p><p></p><p></p><p>Ok so I got my S16 back, NFF Return, and Care support says that they cannot simulate the problem. They asked me to test again and see if the issue is still occurring.. So I set up a JBL PRX615, Plugged the S16 into AES50-A port. Set the routing so that OUTS 9-16 were configured for AES50A 1-8. I plug the XLR cable from the speaker to the X32 on output 16 and set the volume so the audio was at a good volume. Now I turn off the speaker, plug it into OUTPUT 8 on the S16, turn the speaker back on without touching the board, and the volume is about 50% lower than when plugged into the X32. I have tried a few different ethernet cables, same result. I have tried different XLR cables, same results. Can anything think of anything else I might be doing wrong?</p></blockquote><p></p>
[QUOTE="John Koepke, post: 124317, member: 7691"] Re: Help with S16 issue Ok so I got my S16 back, NFF Return, and Care support says that they cannot simulate the problem. They asked me to test again and see if the issue is still occurring.. So I set up a JBL PRX615, Plugged the S16 into AES50-A port. Set the routing so that OUTS 9-16 were configured for AES50A 1-8. I plug the XLR cable from the speaker to the X32 on output 16 and set the volume so the audio was at a good volume. Now I turn off the speaker, plug it into OUTPUT 8 on the S16, turn the speaker back on without touching the board, and the volume is about 50% lower than when plugged into the X32. I have tried a few different ethernet cables, same result. I have tried different XLR cables, same results. Can anything think of anything else I might be doing wrong? [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Pro Audio
Junior Varsity
X32 Discussion
Top
Bottom
Sign-up
or
log in
to join the discussion today!
