Reply to thread

Message

<blockquote data-quote="John Koepke" data-source="post: 124336" data-attributes="member: 7691">Re: Help with S16 issueShane,When I use the outputs directly on the X32, the volume is normal.Per,I Re-Initialized the console this AM.&nbsp; No scene or show file.&nbsp; I even left the routing alone, and changed the S16 to be out 1-8 + 8 for testing.&nbsp; Same results.Glenn,Its extremely Odd..&nbsp; I had a speaker setup on Channel 16 and a speaker setup on output 8 of the S16, I had to turn off the speaker connected to the X32 so I could just hear the faint music from the output 8 of the S16.&nbsp; I have swapped Ethernet, Power, and XLR cables..&nbsp; Same issue across the board.&nbsp; Its Odd that it is happening on all channels, inputs and outputs on the S16.&nbsp; Maybe a malfunction with whatever feeds the Pins 2 and 3?Thank you all for your advice.&nbsp; This AM I called into Behringer Support in NV, and talked to a Sam Daniels.&nbsp; We re-initialized the Console, verified the routing configuration.&nbsp; We change the S16 to be 1-8 + 8, so that channel 8 would mirror channel 16 on the X32.&nbsp; With Sam on the Phone, I plug my JBL PRX 615M into out 16 on the X32 and set the volume to a decently high level.&nbsp; I then stopped playing the song, powered down the speaker, moved the XLR cable to port 8 on the S16, powered the speaker back up, and hit play on the same song on the ipod.&nbsp; Volume was considerably lower.&nbsp; Sam said they have never seen this before.&nbsp; He has setup another RA for me, this time they paid for shipping both ways.&nbsp; Sam has requested the RA go straight to him so he can hear this for himself.&nbsp; I have packed the unit up and it should be on its way to NV in a few hours when the package is accepted by the carrier..I honestly hope that it is just an odd issue with the S16, and that I don&#039;t have a bigger issue with the X32.&nbsp; Does anyone live within Napa, CA or close to it that would be willing to loan me an S16 to help validate?</blockquote>

[QUOTE="John Koepke, post: 124336, member: 7691"] Re: Help with S16 issue Shane, When I use the outputs directly on the X32, the volume is normal. Per, I Re-Initialized the console this AM. No scene or show file. I even left the routing alone, and changed the S16 to be out 1-8 + 8 for testing. Same results. Glenn, Its extremely Odd.. I had a speaker setup on Channel 16 and a speaker setup on output 8 of the S16, I had to turn off the speaker connected to the X32 so I could just hear the faint music from the output 8 of the S16. I have swapped Ethernet, Power, and XLR cables.. Same issue across the board. Its Odd that it is happening on all channels, inputs and outputs on the S16. Maybe a malfunction with whatever feeds the Pins 2 and 3? Thank you all for your advice. This AM I called into Behringer Support in NV, and talked to a Sam Daniels. We re-initialized the Console, verified the routing configuration. We change the S16 to be 1-8 + 8, so that channel 8 would mirror channel 16 on the X32. With Sam on the Phone, I plug my JBL PRX 615M into out 16 on the X32 and set the volume to a decently high level. I then stopped playing the song, powered down the speaker, moved the XLR cable to port 8 on the S16, powered the speaker back up, and hit play on the same song on the ipod. Volume was considerably lower. Sam said they have never seen this before. He has setup another RA for me, this time they paid for shipping both ways. Sam has requested the RA go straight to him so he can hear this for himself. I have packed the unit up and it should be on its way to NV in a few hours when the package is accepted by the carrier.. I honestly hope that it is just an odd issue with the S16, and that I don't have a bigger issue with the X32. Does anyone live within Napa, CA or close to it that would be willing to loan me an S16 to help validate? [/QUOTE]

Verification