Reply to thread

Message

<blockquote data-quote="Pauly Mel" data-source="post: 145674" data-attributes="member: 2406">Snippet Syntax - Subs -XDB monitor outG&#039;day All,I am using snippets to set the current pair of monitors being used - For example.. a small and a large pair.I also run subs - Which has been great untill I just replaced my large mnonitors and now there&#039;s too much bottom end with the subs on. So... I tunr them off with the below snippet (Outputs 11 &amp; 12 are the subs).#2.1# &quot;JBL NoEQ&quot; 4 1 0 0 1/outputs/main/11 0 IN/LC/outputs/main/12 0 IN/LC/outputs/main/13 74 IN/LC/outputs/main/14 75 IN/LC/outputs/main/15 0 IN/LC/outputs/main/16 0 IN/LC..Now there&#039;s not enough bottom end... however if I change the 11 &amp; 12 to 74 &amp; 75 (like the monitors on 13 &amp; 14) there&#039;s too much sub.So.. I thought I&#039;d change the 11 &amp; 12 to 50 &amp; 50... It then seems the monitors were set at 50 and no longer varied with the main fader (as they do when it&#039;s 74 &amp; 75).Can someone please advise exactly what the syntax is for the snippets.. and ideally, a way to subtract X Db from tthe main fader out.Thanks... Hope I&#039;ve explained properly <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":-)" title="Smile&nbsp; &nbsp; :-)"&nbsp; data-smilie="1"data-shortname=":-)" />ThanksPauly</blockquote>

[QUOTE="Pauly Mel, post: 145674, member: 2406"] Snippet Syntax - Subs -XDB monitor out G'day All, I am using snippets to set the current pair of monitors being used - For example.. a small and a large pair. I also run subs - Which has been great untill I just replaced my large mnonitors and now there's too much bottom end with the subs on. So... I tunr them off with the below snippet (Outputs 11 & 12 are the subs). #2.1# "JBL NoEQ" 4 1 0 0 1 /outputs/main/11 0 IN/LC /outputs/main/12 0 IN/LC /outputs/main/13 74 IN/LC /outputs/main/14 75 IN/LC /outputs/main/15 0 IN/LC /outputs/main/16 0 IN/LC ..Now there's not enough bottom end... however if I change the 11 & 12 to 74 & 75 (like the monitors on 13 & 14) there's too much sub. So.. I thought I'd change the 11 & 12 to 50 & 50... It then seems the monitors were set at 50 and no longer varied with the main fader (as they do when it's 74 & 75). Can someone please advise exactly what the syntax is for the snippets.. and ideally, a way to subtract X Db from tthe main fader out. Thanks... Hope I've explained properly :-) Thanks Pauly [/QUOTE]

Verification