Reply to thread

Message

<blockquote data-quote="Paul Vannatto" data-source="post: 145685" data-attributes="member: 4071">Re: Snippet Syntax - Subs -XDB monitor outThat is correct Pauly. If you want more details on these values, have a look at Patricks OSC document (<a href="https://sites.google.com/site/patrickmaillot/x32" target="_blank">https://sites.google.com/site/patrickmaillot/x32</a>), particulary page 30. The /output/main command is equivalent to the Routing, Out 1-16 screen on the X32You will also notice that the second value (IN/LC) is incorrect. That second value is the tap point (eg. POST).You have to set the output value of the signal that it is sent. For example, if the Output 11 is assigned mixbus 11, then you would need to set the mixbus main fader level accordingly. If you want to set it at -5db you would use the following command:/bus/11/mix/fader -5&nbsp;&nbsp; (see page 24)Unfortunately not. These are absolute values. The only way to accomplish this is to request the current level from the X32, subtract 4db and send the new value back to the X32. Snippets don&#039;t have this capability. But the X32 Live Toolbox (<a href="http://sourceforge.net/projects/xairlivetoolbox/" target="_blank">http://sourceforge.net/projects/x32livetoolbox/</a>) has this built in.Paul</blockquote>

[QUOTE="Paul Vannatto, post: 145685, member: 4071"] Re: Snippet Syntax - Subs -XDB monitor out That is correct Pauly. If you want more details on these values, have a look at Patricks OSC document ([URL]https://sites.google.com/site/patrickmaillot/x32[/URL]), particulary page 30. The /output/main command is equivalent to the Routing, Out 1-16 screen on the X32 You will also notice that the second value (IN/LC) is incorrect. That second value is the tap point (eg. POST). You have to set the output value of the signal that it is sent. For example, if the Output 11 is assigned mixbus 11, then you would need to set the mixbus main fader level accordingly. If you want to set it at -5db you would use the following command: /bus/11/mix/fader -5 (see page 24) Unfortunately not. These are absolute values. The only way to accomplish this is to request the current level from the X32, subtract 4db and send the new value back to the X32. Snippets don't have this capability. But the X32 Live Toolbox ([URL="http://sourceforge.net/projects/xairlivetoolbox/"]http://sourceforge.net/projects/x32livetoolbox/[/URL]) has this built in. Paul [/QUOTE]

Verification