Reply to thread

Message

<blockquote data-quote="Pauly Mel" data-source="post: 145691" data-attributes="member: 2406">Re: Snippet Syntax - Subs -XDB monitor outHi again Paul,Well... I _think_ I mean 74 &amp; 75 - Which is the sources I&#039;m taking to each output...so I assume main stereo out? [Edit] - just counted them out.. 74 &amp; 75 are Monitor L &amp; Monitor R out... SO the main fader can be used to vary volume.Back to the problem - I have 2 sets of monitors, (1 set small &amp; 1 set Large), and one Sub.I have the sub connected to outputs 11 &amp; 12I have the Large monitors connected to outputs 13 &amp; 14I have the small monitors connected to outputs 15 &amp; 16I use snippets to turn on/off the large or small monitors, and the sub stays on for both. The sub _was_ fine at the same level for both sets of monitors but I have changed the big ones, and now (when I am listening to the large monitors) the sub is too prominent.So... What I need to do is to lower the sub level when I choose the large monitors using a snippet.Hope that clarifies it?Thanks again - Your help is valuable to me!PaulyI want to be able to drop the level of the sub when I</blockquote>

[QUOTE="Pauly Mel, post: 145691, member: 2406"] Re: Snippet Syntax - Subs -XDB monitor out Hi again Paul, Well... I _think_ I mean 74 & 75 - Which is the sources I'm taking to each output...so I assume main stereo out? [Edit] - just counted them out.. 74 & 75 are Monitor L & Monitor R out... SO the main fader can be used to vary volume. Back to the problem - I have 2 sets of monitors, (1 set small & 1 set Large), and one Sub. I have the sub connected to outputs 11 & 12 I have the Large monitors connected to outputs 13 & 14 I have the small monitors connected to outputs 15 & 16 I use snippets to turn on/off the large or small monitors, and the sub stays on for both. The sub _was_ fine at the same level for both sets of monitors but I have changed the big ones, and now (when I am listening to the large monitors) the sub is too prominent. So... What I need to do is to lower the sub level when I choose the large monitors using a snippet. Hope that clarifies it? Thanks again - Your help is valuable to me! Pauly I want to be able to drop the level of the sub when I [/QUOTE]

Verification