Reply to thread

Message

<blockquote data-quote="Pauly Mel" data-source="post: 145816" data-attributes="member: 2406">Re: Using Snippets to select studio monitorsOk - Can&#039;t attach files so here&#039;s the &#039;Reset&#039; snippet - This in effect sets everything up - It&#039;s commented so should be self explanatory. Questions are welcome of course.===============================================#2.1# &quot;Reset&quot; 0 0 0 0 1## V10# Matrix Colours &amp; names/mtx/01/config/ &quot;Subs L&quot; 1 BL&nbsp; &nbsp; /mtx/02/config/ &quot;Subs R&quot; 1 BL/mtx/03/config/ &quot;JBL L&quot; 1 GNi&nbsp; &nbsp; /mtx/04/config/ &quot;JBL R&quot; 1 GNi/mtx/05/config/ &quot;Qsted L&quot; 1 GNi&nbsp; &nbsp; /mtx/06/config/ &quot;Qsted R&quot; 1 GNi# Setup matrix linked pairs/config/mtxlink/1-2 ON/config/mtxlink/3-4 ON/config/mtxlink/5-6 ON# Set matrix mix on# # you only need to set odd ch, because of linked pairs)/mtx/01/mix/on ON/mtx/03/mix/on ON/mtx/05/mix/on ON# Set matrix levels to 0db /mtx/01/mix/fader 0.0/mtx/03/mix/fader 0.0/mtx/05/mix/fader 0.0# Send Main LR to matrixes/main/st/mix/01/level 0.0/main/st/mix/03/level 0.0/main/st/mix/05/level 0.0/main/st/mix/01/type POST/main/st/mix/03/type POST/main/st/mix/05/type POST# ------------------------# 11 &amp; 12 are subs# 13 &amp; 14 are JBLs# 15 &amp; 16 are Questeds # ------------------------# Setup outputs 11-16 to matrix 1-6/outputs/main/11/src 20/outputs/main/12/src 21/outputs/main/13/src 22/outputs/main/14/src 23/outputs/main/15/src 24/outputs/main/16/src 25# Setup outputs 11-16 to Post Fader/outputs/main/11/pos POST/outputs/main/12/pos POST/outputs/main/13/pos POST/outputs/main/14/pos POST/outputs/main/15/pos POST/outputs/main/16/pos POST# Monitor bus cleanup/config/solo/masterctrl OFF/main/st/config/name &quot;L/R&quot;===============================================</blockquote>

[QUOTE="Pauly Mel, post: 145816, member: 2406"] Re: Using Snippets to select studio monitors Ok - Can't attach files so here's the 'Reset' snippet - This in effect sets everything up - It's commented so should be self explanatory. Questions are welcome of course. =============================================== #2.1# "Reset" 0 0 0 0 1# # V10 # Matrix Colours & names /mtx/01/config/ "Subs L" 1 BL /mtx/02/config/ "Subs R" 1 BL /mtx/03/config/ "JBL L" 1 GNi /mtx/04/config/ "JBL R" 1 GNi /mtx/05/config/ "Qsted L" 1 GNi /mtx/06/config/ "Qsted R" 1 GNi # Setup matrix linked pairs /config/mtxlink/1-2 ON /config/mtxlink/3-4 ON /config/mtxlink/5-6 ON # Set matrix mix on# # you only need to set odd ch, because of linked pairs) /mtx/01/mix/on ON /mtx/03/mix/on ON /mtx/05/mix/on ON # Set matrix levels to 0db /mtx/01/mix/fader 0.0 /mtx/03/mix/fader 0.0 /mtx/05/mix/fader 0.0 # Send Main LR to matrixes /main/st/mix/01/level 0.0 /main/st/mix/03/level 0.0 /main/st/mix/05/level 0.0 /main/st/mix/01/type POST /main/st/mix/03/type POST /main/st/mix/05/type POST # ------------------------ # 11 & 12 are subs # 13 & 14 are JBLs # 15 & 16 are Questeds # ------------------------ # Setup outputs 11-16 to matrix 1-6 /outputs/main/11/src 20 /outputs/main/12/src 21 /outputs/main/13/src 22 /outputs/main/14/src 23 /outputs/main/15/src 24 /outputs/main/16/src 25 # Setup outputs 11-16 to Post Fader /outputs/main/11/pos POST /outputs/main/12/pos POST /outputs/main/13/pos POST /outputs/main/14/pos POST /outputs/main/15/pos POST /outputs/main/16/pos POST # Monitor bus cleanup /config/solo/masterctrl OFF /main/st/config/name "L/R" =============================================== [/QUOTE]

Verification