Reply to thread

Message

<blockquote data-quote="cary begans" data-source="post: 146326" data-attributes="member: 5902">Re: Bus / Main L/R question:The default x32 assignment in the &quot;out 1-16&quot; routing column is mix bus 1-14, for the first 14 positions and main L on 15 and main R on 16. You don&#039;t NEED to turn off anything. The default &quot;xlr out&quot; column is out 1-4, out 5-8, out 9-12 and out 13-16. If you changed the last group of 4 in the xlr out menu to something else you wouldn&#039;t get mains or fx from xlr 15/16, well you could but it would require some additional fairly complicated routing such as using P16 sources. I don&#039;t think you get both a mix bus and a main out from a single xlr assignment unless it&#039;s set as a matrix, its one or the other, mix bus or main out, or a matrix. You must have somewhere along the way changed the default to mix bus 15 and mix bus 16 instead out main L and main R. The only way you could hear both fx and mains from a single output is if you made a Matrix that had Main L/R and your fx mix busses as components of it and then assigned that matrix to an XLR output in the &quot;out 1-16&quot; column.</blockquote>

[QUOTE="cary begans, post: 146326, member: 5902"] Re: Bus / Main L/R question: The default x32 assignment in the "out 1-16" routing column is mix bus 1-14, for the first 14 positions and main L on 15 and main R on 16. You don't NEED to turn off anything. The default "xlr out" column is out 1-4, out 5-8, out 9-12 and out 13-16. If you changed the last group of 4 in the xlr out menu to something else you wouldn't get mains or fx from xlr 15/16, well you could but it would require some additional fairly complicated routing such as using P16 sources. I don't think you get both a mix bus and a main out from a single xlr assignment unless it's set as a matrix, its one or the other, mix bus or main out, or a matrix. You must have somewhere along the way changed the default to mix bus 15 and mix bus 16 instead out main L and main R. The only way you could hear both fx and mains from a single output is if you made a Matrix that had Main L/R and your fx mix busses as components of it and then assigned that matrix to an XLR output in the "out 1-16" column. [/QUOTE]

Verification