Reply to thread

Message

<blockquote data-quote="Chris Mittlesteadt" data-source="post: 83174" data-attributes="member: 2951">Re: X32 DiscussionI have an interesting problem.&nbsp; It could simply be that I&#039;m missing something somewhere too.&nbsp; I have a performing arts center installation with an X32 and 3 S16 units.&nbsp; I&#039;m using 2 S16 boxes run from the console&#039;s AES50A port then into the first S16&#039;s AES50A port then out of the same unit&#039;s AES50B port into the second S16&#039;s AES50A port for stage inputs and outputs.&nbsp; In other words, all daisy-chained from the X32 AES50A.&nbsp; The third S16 serves as system outputs to processing/amp rack and is connected to the console&#039;s AES50B port via the S16&#039;s AES50A port.&nbsp; Here&#039;s the rub - I&#039;ve got a line run to an alternate mix position in the house that is connected to the third (last mentioned) S16&#039;s AES50B port.&nbsp; For some reason, I cannot obtain sync between the console and #3 S16 when connected from the AES50B port on the console to the AES50B port on #3 S16.&nbsp; Does anyone know why?&nbsp; It&#039;s not cabling, because I can connect just fine with this alternate cable run if I connect to S16 #3&#039;s AES50A port.&nbsp; What am I doing wrong?BTW, I&#039;m really enjoying the flexibility of the system vs. the cost!Thanks!Chris</blockquote>

[QUOTE="Chris Mittlesteadt, post: 83174, member: 2951"] Re: X32 Discussion I have an interesting problem. It could simply be that I'm missing something somewhere too. I have a performing arts center installation with an X32 and 3 S16 units. I'm using 2 S16 boxes run from the console's AES50A port then into the first S16's AES50A port then out of the same unit's AES50B port into the second S16's AES50A port for stage inputs and outputs. In other words, all daisy-chained from the X32 AES50A. The third S16 serves as system outputs to processing/amp rack and is connected to the console's AES50B port via the S16's AES50A port. Here's the rub - I've got a line run to an alternate mix position in the house that is connected to the third (last mentioned) S16's AES50B port. For some reason, I cannot obtain sync between the console and #3 S16 when connected from the AES50B port on the console to the AES50B port on #3 S16. Does anyone know why? It's not cabling, because I can connect just fine with this alternate cable run if I connect to S16 #3's AES50A port. What am I doing wrong? BTW, I'm really enjoying the flexibility of the system vs. the cost! Thanks! Chris [/QUOTE]

Verification