Hello All - I have a new Mackie DL16s and am confused as to how to effectively use the Trim and Gain - having the biggest issue with acoustic guitar and lead vocals. Everything else is ok. if you are not familiar with Mackie Masterfader 5 which is also new to me. The challenge to me is the channel slider, master volume slider and then Gain and Trim.
Not professional, but I hope you all will let me stay. I have been mixing in a church since I was 17 or so, Finally have moved up to a Soundcraft Expression Si 3 Which is quite the rocket science. We are using a Multidigital card with USB out recording into Reaper on a windows PC. The Worship service is more like a Symphony than most churches I have seen. This can cause its own problems.
Rob: I just recommended you to a bride for a wedding gig (lav mic for a minister) on 11/3/18 at the Royal Senesta Hotel in Cambridge.
If you are unavailable, please recommend someone else.
Best, Mike Monte
I have a couple of Crest 9001's on my shelf with obscure faults.
I talk to Peavey / Barnes & Mullen here in the UK.
They have provided me with the schematics but there does not appear to be a service manual or details of the wiring harnesses.
Also details of how all the protection / Autoramp / IGM would help.
Can you help?
Dredging up a nearly 5 year old thread to try to make a sales contact is generally considered poor form, especially in one's first post...
The forum rules can be hard to find, but here's a link: https://soundforums.net/community/help/rules/
Of note is that they require manufacturers and dealers to disclose their affiliations.
I did the original drawings. The file is attached.
I had to add .PDF to DWG file since the forum would not allow me to upload it. Just remove the .PDF extension and it should work fine.
I believe it was Max that did an updated drawing with a slightly different design. You can find that link in the forum post.
My Sennheizer Ew100 series wireless mic keeps turning off all by itself. The moment you speak into it it shuts of, but it will remain on as long as you do not speak into it. What could be the problem here? I live in Jamaica and it doesn't seem like we have a dealer here to service it, I usually send it to Florida for repairs (at a high cost) but I don't want to have to use that option if it is a program solution or other simple fix.
If my memory serves me I purchased the BMS 4594HE's from you through the group buy.
Looks like I'll be needing some replacement diaphragms for some of those, I had an "incident" at an event on the 4th that took mine out.
I was wondering what the availability and cost on replacements might be? These are the 16ohm model.
I plan on doing a damage assessment this weekend and getting a total on what all I need.