Michael Conner and Yamaha PM10 Archives

Paul Simon Front of House Engineer Is At “Home” On Yamaha...

Lisa Young - August 6, 2018

Join the Discussion

New DIY Mid High (90deg) November 12, 2019
Specifications (best guess) 90 x 50 horn pattern 100Hz – 20KHz +/- 1.5dB approx. Ignore the frequency response below about 400Hz. I don’t have a decent space to measure this speaker in. There was also a double 18 used below 100Hz Weight - 32Kgs Size - 930-H x430-D x 385-W mm Low Mid 100Hz – […]
Carvin Line Array? November 10, 2019
A local acquaintance has aquired 8 of these for use above 6 Yorkville UCS subs. I have only heard them straight stacked on top of the subs and 2/side on poles above subs. Carbon processor with stock settings I assume. The seemed very peaky at certain high frequencies but that could just be a taste […]
AV as a managed services November 9, 2019
Have any of you worked in a setting where your relationship with a client began with an installation project but continued longterm for event support? I'm looking into the viability of pitching AV installation/design services as part of a "you don't have to worry about any aspect of technology operations in your [non-technology focused] business" […]
PM 60 & 90 settings and alternative drivers. November 9, 2019
I have had a lot of requests for settings and alternative drivers that are a little cheaper. When I have a bit of free time I will post up my Lake LM26 settings. Unfortunately I only have Lake processing and there can be a lot of variation between different processors with the same settings - […]
My Sennheiser ew100 intermittently cuts out on me while performing November 9, 2019
I am a true novice, so I'll try to be as detailed as possible when explaining my issue. I've found recently when performing and using my cordless mic, it cuts out for anywhere from 15-30 seconds at a time intermittently. I have yet to find a rhyme or reason for it. Most of the places […]
Lab Gruppen FP10000Q November 7, 2019
i'm selling two (orig.) Lab Gruppen in perfectly condition, both didn't run more than 10h. (in future we want to change our sub to 1 Ohm load, that's why they are sold) the one is with activated 10years garanty (I'm not sure if there is a problem when sold) the other one is not even […]

Tag: Michael Conner and Yamaha PM10

Paul Simon Front of House Engineer Is At “Home” On Yamaha...

Advertisement