Installation Archives - Page 2 of 17

Advanced Subwoofer Techniques May 21, 2019
There are a few tricks you can pull out of your sleeve to make your low frequency arrays work better. By building directional subwoofer arrays, energy can be kept off the stage and walls and kept on the audience where it belongs. These arrays require a little more signal processing and planning to implement, but […]
Double 10 and Horn May 20, 2019
I have been asked by a few people if I could put up some details of my dual 10” and horn speaker I mentioned in the DIY Mid Hi thread. I built the original design 18 years ago, it’s now very similar to an active version of JTR’s - 3TX. So here goes… It uses […]
New DIY Mid High (90deg) May 20, 2019
Specifications (best guess) 90 x 50 horn pattern 100Hz – 20KHz +/- 1.5dB approx. Ignore the frequency response below about 400Hz. I don’t have a decent space to measure this speaker in. There was also a double 18 used below 100Hz Weight - 32Kgs Size - 930-H x430-D x 385-W mm Low Mid 100Hz – […]
Alcons LR28 Is The Right Philosophy For China Media Group Festival May 20, 2019
Large-format pro-ribbon line-arrays prove their strength in outdoor performance With a spectacular outdoor live production and 6000m2 audience arena, the Mid-Autumn Festival Party of China Media Group is a difficult challenge for any sound reinforcement system. However, thanks to an Alcons Audio pro-ribbon LR28 larger-format line array system, the audience at the latest event in […]
L-Acoustics Cultivates Abundant Sound at The Grove May 17, 2019
RIVERSIDE, California – May 2019 — When The Grove Community Church of Riverside, California built its current Worship Center more than a dozen years ago, Olympia, Washington-based CCI Solutions facilitated the design and installation of the sound system for its 1,800-seat main auditorium. Since that time, like many churches, The Grove’s music sets have gradually […]
Radio Aalsmeer Puts Lawo Crystal & RƎLAY On The Air May 17, 2019
Radio Aalsmeer (radioaalsmeer.nl), the community radio station for the town of Aalsmeer, The Netherlands, has taken their on-air studio digital with a new mixing console and “virtual radio” software solutions from Lawo. The main studio installation consists of a 16-fader Crystal surface powered by a Lawo Compact Engine. Value played a big part in the […]

Installation

Advertisement