running qrx 212's, what is your recommendations for the proper splay in a two cab top setup? Evan K ran these, looked like 6 to 7". Thought they'd play a little friendlier than that. I could actually go set them up, flip the horns and experiment but I'm too busy gearing up to watch Butler go for another win.
Lucy, can you do some splaynin to me?
- Thread starter Steve Tarak
- Start date
Re: Lucy, can you do some splaynin to me?
My measurement had them with the backs touching and the width of my hand between the fronts (about 4.75 in). This is with the horns in the normal 10 degree down orientation.
I used SMAART outdoors with pink noise and the spectrograph. I walked the measurement mic back and forth in front in an arc and looked at the display to make it as even as I could.
My measurement had them with the backs touching and the width of my hand between the fronts (about 4.75 in). This is with the horns in the normal 10 degree down orientation.
I used SMAART outdoors with pink noise and the spectrograph. I walked the measurement mic back and forth in front in an arc and looked at the display to make it as even as I could.