So to start off....forgive me if this topic was ever covered on the old forum. I was supplying my rig to a local fair who had a popular 80's band, hitting the kit pretty hard. Anyway, the top amp of my 4 x PLX3402 combination was hotter than the rest of the amps, and was giving a slight clip indication, without hitting the yellow inidcation led lamp. it was hitting green led / green led/ red light clip "flickering".. It was powering the mid/high section of 3 EAW KF730 cabs. So two questions - what would cause the amp to behave this way, and secondly, was the amp extra hot due to induction from the others, or was it over-heating from the light clipping. I checked the 3 other amps running the other mid/high signal, and they were all clean. I'm running them bridged mono. Should I space these amps out with a rack space in between each for better cooling?
thanks
SP
thanks
SP