[FS] XTA DP200 & more

[Tom Manchester]

I have one XTA DP200 available for sale. This is in good cosmetic and working condition. It has the newer style front panel cosmetics as well. I also believe it has the RS485 option card installed. This is a very professional quality processor with better quality filters and limiting than just about anything else you will find in it's price range. Asking $300

I also have the following:

25' 7 pin socapex motor cable in good condition; $40

Mackie 1642 mixer. It has a few issues with low level on some of the mic pre's. Could just need cleaning? As-is; $40

EWI 2 space rack. I think it's the R2UE-10, great for a small RF rack! In about 8/10 condition; $50

Whirlwind W1 panelmount female W1CF. Has about 8" of wires already soldered on for convenient installation. I think it's wired to whirlwind standard. $10

I also have ~20 dirty, used, and well worn Yamaha motorized faders from my LS9 refurb job. If you are careful you can crack these open, clean them, and get a little more use out of them. Great to keep as spares for your Yamaha digital boards, build a robot with them, custom project???? Make offer on any quantity you would like.


All prices plus shipping. Feel free to make offers on any of this stuff!

 

[Tom Manchester]

Re: XTA DP200 & more

Mackie 1642 is Sold, everything else is available.

I am also adding a second small 3 space rack. Good condition, has a little bit of paint covering where my logo was. Nice and lightweight for a carry rack, etc. $30 for this one?

I also looked at the motor control cable and saw that it is actually 50' long, not 25 as I originally thought. I'll keep it at the same price and you get a bonus 25'!

Also adding a very clean dbx 160x. Recently tweaked and peaked by a dbx authorized service center. $180

 

[marty smith]

Re: XTA DP200 & more

Hello Tom.
Is the XTA DP 200 still around per chance?
Marty Smith
OCEAN SOUND
631-375-8274

I have one XTA DP200 available for sale. This is in good cosmetic and working condition. It has the newer style front panel cosmetics as well. I also believe it has the RS485 option card installed. This is a very professional quality processor with better quality filters and limiting than just about anything else you will find in it's price range. Asking $300

I also have the following:

25' 7 pin socapex motor cable in good condition; $40

Mackie 1642 mixer. It has a few issues with low level on some of the mic pre's. Could just need cleaning? As-is; $40

EWI 2 space rack. I think it's the R2UE-10, great for a small RF rack! In about 8/10 condition; $50

Whirlwind W1 panelmount female W1CF. Has about 8" of wires already soldered on for convenient installation. I think it's wired to whirlwind standard. $10

I also have ~20 dirty, used, and well worn Yamaha motorized faders from my LS9 refurb job. If you are careful you can crack these open, clean them, and get a little more use out of them. Great to keep as spares for your Yamaha digital boards, build a robot with them, custom project???? Make offer on any quantity you would like.


All prices plus shipping. Feel free to make offers on any of this stuff!

 

[Tom Manchester]

Re: XTA DP200 & more

Hi Marty,
The DP200, as well as most of the other items are sold. Thanks for the inquiry though!
-Tom