I need to replace the grill covering on some cabinets that I have that are similar to the design of the SRX722. Right now they have a soft cover on the front of them and I want to upgrade to a metal perforated design. It would need to be about 14" wide and 40" tall. I'm wondering if someone already has the sheet metal pressed and you just order the dimensions. Any ideas?
Perforated Metal Grills
- Thread starter Kip Conner
- Start date
Silas Pradetto
Graduate Student
Re: Perforated Metal Grills
I have the metal and would be happy to cut it to your size. It's bare and would need to be painted, or I can paint it.
You can buy full 4x10 foot sheets from Argus Steel in Virginia, who also sells grill steel to Community.
I have the metal and would be happy to cut it to your size. It's bare and would need to be painted, or I can paint it.
You can buy full 4x10 foot sheets from Argus Steel in Virginia, who also sells grill steel to Community.
Re: Perforated Metal Grills
This is probably a bit too late but ff you're still after some you might find what you're after from here:
Perforated Sheet | Perforated Plate | Perforated Metal
This is probably a bit too late but ff you're still after some you might find what you're after from here:
Perforated Sheet | Perforated Plate | Perforated Metal