What are you guys using for case stencils? I made one years ago, but it's falling apart now and I need something a little more "pro" looking. Plus a few different sizes would be cool.
Thanks!
Evan
Thanks!
Evan
Case stencils
- Thread starter Evan Kirkendall
- Start date
Re: Case stencils
No personal experience, but something like this would seem to be the way to go:
Spray paint stencils & stock stencils, or let us create you a custom stencil! Stencils Online
I'm a fan of difficult to remove stickers rather than stencils. Difficult to remove still allows for me to remove them when I want to sell the equipment, but they are more permanent than gaff tape.
No personal experience, but something like this would seem to be the way to go:
Spray paint stencils & stock stencils, or let us create you a custom stencil! Stencils Online
I'm a fan of difficult to remove stickers rather than stencils. Difficult to remove still allows for me to remove them when I want to sell the equipment, but they are more permanent than gaff tape.
Re: Case stencils
We found plenty people offering to make stencils online, and I remember it being cheaper than I expected. I imagine it's a relatively simple task for someone with a computer controlled cutter.
My one recommendation would be to get smaller stencils than you maybe think you need. It's a lot less effort cleaning a smaller stencil off when you sell a case on. :lol:
We found plenty people offering to make stencils online, and I remember it being cheaper than I expected. I imagine it's a relatively simple task for someone with a computer controlled cutter.
My one recommendation would be to get smaller stencils than you maybe think you need. It's a lot less effort cleaning a smaller stencil off when you sell a case on. :lol:
Silas Pradetto
Graduate Student
Re: Case stencils
Print nice colorful logos and labels on heavy paper, and then attach them to your cases with some lexan. I've seen lots of companies do this, that way they can easily change the labels without a mess, and it allows cases to go out on rentals 'unbranded'.
Print nice colorful logos and labels on heavy paper, and then attach them to your cases with some lexan. I've seen lots of companies do this, that way they can easily change the labels without a mess, and it allows cases to go out on rentals 'unbranded'.
Re: Case stencils
How do the stickers fare on wedges with rockhard paint on them Ie not flat but bumpy ?
I ask because I too am looking to get a stencil made and never thought of using a sticker.
Andrew
How do the stickers fare on wedges with rockhard paint on them Ie not flat but bumpy ?
I ask because I too am looking to get a stencil made and never thought of using a sticker.
Andrew
We went to stickers and most of them have been pretty good the only one we've had trouble with is this bumpy case everything else has been fine
Re: Case stencils
Have you tried warming up/softening the sticker with a heat gun and then pressing it in to the "bumps? Sometimes it works, sometimes not...
Have you tried warming up/softening the sticker with a heat gun and then pressing it in to the "bumps? Sometimes it works, sometimes not...
Re: Case stencils
I have been using some stickers on some of my cases. After about a year some of them are looking a little ragged. Easy fix I guess but definitely not a permanent solution.
I have been using some stickers on some of my cases. After about a year some of them are looking a little ragged. Easy fix I guess but definitely not a permanent solution.
Re: Case stencils
I do not like stickers. They look like shit after a few gigs, peel off over time and fade. I want something I can paint on and not have to worry about. I'll probably just make my own stencil again...
Evan
I do not like stickers. They look like shit after a few gigs, peel off over time and fade. I want something I can paint on and not have to worry about. I'll probably just make my own stencil again...
Evan
Re: Case stencils
I agree completely.
If you want some thin Mylar to make stencils, I have about 25 feet left from the leading edge of a UP Comet hang glider I "decommisioned"...
I'm not sure if you know this already, but using an ink pad and roller works far better than spray paint, and also allows use of a solvent to remove the stencil mark without removing paint.
In fact, on a system stolen from me, every stencil mark had been removed, except on one stage monitor, and that single surviving stencil resulted in me getting most of a speaker system (and a 32 channel splitter snake with quick latches and Jenson transformers, still had that "new snake smell") back almost 10 years after the theft.
Art
Evan,
I agree completely.
If you want some thin Mylar to make stencils, I have about 25 feet left from the leading edge of a UP Comet hang glider I "decommisioned"...
I'm not sure if you know this already, but using an ink pad and roller works far better than spray paint, and also allows use of a solvent to remove the stencil mark without removing paint.
In fact, on a system stolen from me, every stencil mark had been removed, except on one stage monitor, and that single surviving stencil resulted in me getting most of a speaker system (and a 32 channel splitter snake with quick latches and Jenson transformers, still had that "new snake smell") back almost 10 years after the theft.
Art
Re: Case stencils
My R&R cases came with smooth plastic labels that were printed and then glued. They actually recessed the label into the material so it's flush- but with the balled corners it would still be fine and not be in any danger of getting knocked off. I'm guess the recessed part helps so it's glued the wood. They are printed for shows so you can write on them with dry erase with show info. Warning Labels | ID Plates | Mcloone
The one on the top of the case is riveted.
My R&R cases came with smooth plastic labels that were printed and then glued. They actually recessed the label into the material so it's flush- but with the balled corners it would still be fine and not be in any danger of getting knocked off. I'm guess the recessed part helps so it's glued the wood. They are printed for shows so you can write on them with dry erase with show info. Warning Labels | ID Plates | Mcloone
The one on the top of the case is riveted.
Re: McLoone labels
We usually write in sharpie and remove with alcohol pads.
Sent from my DROID RAZR 2
We usually write in sharpie and remove with alcohol pads.
Sent from my DROID RAZR 2
Re: Case stencils
Good tip, thanks. Since the case was built for my personal console that is where I stick the shipping sticker!
Good tip, thanks. Since the case was built for my personal console that is where I stick the shipping sticker!