01V96 effects routing help?

[Dave Rickard]

I hope I'm not overlooking an easy answer to this, because I'd feel really silly, but here goes.

I'm running a reverb on AUX6->FX1->ST1 , and Mono (tap) delay on AUX7->FX2->ST2.* But the delay is "dry" since it goes straight to LR.

What I'd like to do is feed the delay into the reverb so the delays have reverb also, but I can't find a way to rout FX2 into FX1.* Is this easy to do?* What am I missing?

I like the convenience of muting and level adjustment on ST2, and I'd like to keep that if possible.

Thanks in advance.

 

[Dave Rickard]

Got it!

The answer was to add it from the AUX6 layer, not the effects patch menu. I also needed to unassign ST2 from the stereo bus on the routing menu.

 

[Jordan Wolf]

Re: 01V96 effects routing help?

Got it!

Hey Dave,

Thanks for updating the post - now when people search for it, they'll actually have the answer (unlike other posts I see that fade into oblivion).

 

[Dave Rickard]

That's what I was thinking.

 

[Dawid Klein]

Re: 01V96 effects routing help?

That's what I was thinking.

Hi,

Dave or someone: I don't catch this. Could you explain in more details how to add rev to delay and how effect patches should looks like? I'm wondering how you added rev just for aux 1 in your case (which knob or fader) ?

Please clear my mind

 

[Dave Rickard]

I went to AUX 6, where my reverb was, and adjusted the ST2 knob as desired. Then, in routing, removed ST2 from LR.

 

[Chris Nixon]

Re: 01V96 effects routing help?

Hi,

Dave or someone: I don't catch this. Could you explain in more details how to add rev to delay and how effect patches should looks like? I'm wondering how you added rev just for aux 1 in your case (which knob or fader) ?

Please clear my mind

It will probably be easier to understand if it's given in less detail.

On almost any desk the way to do this is to send the delay return channel into the reverb mix.

Chris

 

[Dave Rickard]

Perfect.