Driverack pa backlight

Re: Driverack pa backlight

Ok so it should have a light. I will try to give it a few taps. Rest of the unit works fine just a little tough as lighting conditions are usually not ideal as you all know.

You might want to open it and reseat the ribbon cable, that could possiblo do the trick allthought a loose ribbon normally blanks out the whole displat, not just the light.
 
Re: Driverack pa backlight

Thanks for ideas. I ended up pulling the cover and got the light going with a little wiggle. Seemed like it was not making contact for some reason. I secured it in position so light stays on. Much better now.