Recent content by Craig Hauber

This just reinforces now why I don't trust new hires that claim they went to "school for sound" A proper education would involve unpatching absolutely everything from the mic thru to the speakers, erasing the board to factory blank start condition and as a whole class together putting the...

Re: Beam Clamp Mountable Equipment Rack I was idling around in Menard's the other day waiting for someone and I looked up only to be reminded of this thread Brand new store opened a month ago and passed all the proper occupancy inspections. Apparently a wall-rack mounted on a uni-strut...

Re: DBX 120A Subharmonic Synthsis... anyone Experienced one? You can still use a 120 with ported eminence subs, -just have to ignore certain functions... (but seriously, even the higher knob very quickly helps the voicecoil find the backplate on some of my Eminence-loaded reflex boxes)

Re: Danley SM 80 vs SM 60F? The continuous dB SPL figure is impressive, but the program figure would probably drown-out an atomic bomb! :razz:

I've been fighting with this "software" for a few days and about to throw my laptop out the window in frustration. Is there anything easier to use out there? I will gladly pay for it. I just want to figure out a simple exponential horn for a 12" Black-Widow that will give me the most 100 to...

It might still be sitting in a field in ND: (BNSF mainline between Williston and Minot a couple days ago.) -It's still amazing to me how in such a flat prairie area people still can't see trains coming and park their oil-industry trucks on the tracks!

I found this hanging in the gym I just did a graduation setup in. There's 7 in total. Done by a "properly licensed A/V design-install firm" like we always recommend people seek when they post on this board. (I really think we are handing that qualification out way too easily!) They appear to...

Re: Video of speaker playing 61 Hz tone recorded at 60 FPS. Each frame appears to be progressively scanned which means the cone has moved between starting at the top of the frame and ending at the bottom, that's what gives it the tilt. Try an iphone on a prop airplane someday, I'm still...

I have 125' of Belden 9913F7 coax left over from an install. RG-8 type large diameter, medium stiffness. (definitely not mic cable but I have wrapped stiffer types than this on stage before) There's enough to make a cross-stage antenna run and a shorter for the near side antenna. I do not...

I'm just stabbing in the dark here that someone may know some of these DIY repair answers. 1)Does anybody have a good source for reconing parts? I have a hobby of restoring antique radios, speakers and backline and would like to rebuild some speakers. Need shims, glues and generic cones and...

Re: Just when you thought you saw the worst.... They look quite similar and seemed to be very close in price -are you sure you're thinking of the right connector? nema 14-50, nema 14-60 The 50 uses a molded pigtail whereas the 60 you can buy an actual connector-plug for, still way cheaper...

Re: 2" exit "line array" horn lens? I was referring to the design that yes the HF is horn loaded, but in a horn that doesn't have a top or bottom surface! In other words, the vertical coverage angle isn't determined by a "horn" type element (such as in the design pictured below) A stack of...

I'm looking to make a momentary push-to-talk switch that handles phantom-powered mics without popping but can also work with dynamics. Is such a thing possible? Was thinking of putting it in a direct-box sized enclosure with an XLR in/out and a large momentary pushbutton on top. Any circuit...

So should I set the LPF at 100kHz? In all seriousness though, good box, great size and format, comes with a bracket automatically, gets stupid-loud -but really wish it had just a wee-bit more low-end. (and how about a 16-ohm version :-)

Also allegedly caused by pyrotechnics and sound "insulation" Kiss nightclub fire - Wikipedia, the free encyclopedia