Normal
Re: 2 Box Subwoofer ArrayYep, you just have to do a little gain matching. This is easiest with Smaart, measure behind the array a reasonable distance away (maybe 10') at a midpoint between your two boxes. Align them with delay, match their acoustic output (you will likely need to turn the rear box down), then polarity invert the rear box. It should be immediately obvious.http://www.bennettprescott.com/downloads/AdvancedSubwooferArraying.pdf
Re: 2 Box Subwoofer Array
Yep, you just have to do a little gain matching. This is easiest with Smaart, measure behind the array a reasonable distance away (maybe 10') at a midpoint between your two boxes. Align them with delay, match their acoustic output (you will likely need to turn the rear box down), then polarity invert the rear box. It should be immediately obvious.
http://www.bennettprescott.com/downloads/AdvancedSubwooferArraying.pdf
