Log in
Register
Home
Forums
New posts
Search forums
What's new
Featured content
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
What's new
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Pro Audio
Varsity
5K$ anyone?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="Art Welter" data-source="post: 84207" data-attributes="member: 52"><p>Re: 5K$ anyone?</p><p></p><p></p><p>They seem to set their own computational and measurement rules :^).</p><p>Response 15 Hz 250Hz: at the downward slope of the graph 25 Hz is about 10 dB down from 50 Hz, and 15 Hz is 30+ dB down, the port would be useful as a fan driven with more than a few watts that low.</p><p></p><p>A 2 x 18" front load bin could measure as the chart shows if measured directly in front of the cabinet center, at around 8 inches (20 centimeters), then to the side at 8", then to the rear at 8"= approximately doubling the distance from the source each time would result in a 12 dB reduction as pictured.</p><p>Do the same at a few meters and the cabinet would measure omni other than in the HF.</p><p></p><p>142 dB peak figures OK with no power compression from 97 dB sensitivity driven with 4949 peak watts (what happens at 5000?), so two cabinets on paper do 148 dB, four cabinets, 154 dB, but hey presto- 3 units stacked per side magically produce 163 dB!</p><p></p><p>Art</p></blockquote><p></p>
[QUOTE="Art Welter, post: 84207, member: 52"] Re: 5K$ anyone? They seem to set their own computational and measurement rules :^). Response 15 Hz 250Hz: at the downward slope of the graph 25 Hz is about 10 dB down from 50 Hz, and 15 Hz is 30+ dB down, the port would be useful as a fan driven with more than a few watts that low. A 2 x 18" front load bin could measure as the chart shows if measured directly in front of the cabinet center, at around 8 inches (20 centimeters), then to the side at 8", then to the rear at 8"= approximately doubling the distance from the source each time would result in a 12 dB reduction as pictured. Do the same at a few meters and the cabinet would measure omni other than in the HF. 142 dB peak figures OK with no power compression from 97 dB sensitivity driven with 4949 peak watts (what happens at 5000?), so two cabinets on paper do 148 dB, four cabinets, 154 dB, but hey presto- 3 units stacked per side magically produce 163 dB! Art [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Pro Audio
Varsity
5K$ anyone?
Top
Bottom
Sign-up
or
log in
to join the discussion today!