Reply to thread

Message

<blockquote data-quote="Peter Morris" data-source="post: 147426" data-attributes="member: 652">Re: 60 Degree&nbsp; DIY Mid HiExactly the same design <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />~<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":-)" title="Smile&nbsp; &nbsp; :-)"&nbsp; data-smilie="1"data-shortname=":-)" />~:smile:.&nbsp; I couldn&#039;t find your Sketchup picture; I wanted to link to it with my post (?).&nbsp; One of the ideas with this design was to use corner ports to make the box stiff and strong without needing much additional bracing. This would hopefully keep weight down to an acceptable level ... its seems to have worked. Its not as good from a fluid dynamic point of view, but weight was more important to me than port efficiency in this case.Not sure where Max got to with a final design / drawing but I&#039;m getting some spectacular results with my boxes.&nbsp; They sound better and go louder than anything else I found of a similar size or weight.</blockquote>

[QUOTE="Peter Morris, post: 147426, member: 652"] Re: 60 Degree DIY Mid Hi Exactly the same design :)~:-)~:smile:. I couldn't find your Sketchup picture; I wanted to link to it with my post (?). One of the ideas with this design was to use corner ports to make the box stiff and strong without needing much additional bracing. This would hopefully keep weight down to an acceptable level ... its seems to have worked. Its not as good from a fluid dynamic point of view, but weight was more important to me than port efficiency in this case. Not sure where Max got to with a final design / drawing but I'm getting some spectacular results with my boxes. They sound better and go louder than anything else I found of a similar size or weight. [/QUOTE]

Verification