Reply to thread

Message

<blockquote data-quote="Mark Wilkinson" data-source="post: 148841" data-attributes="member: 8989">Re: 60 Degree&nbsp; DIY Mid HiThanks Peter,&nbsp;&nbsp; I&#039;m not using the passive crossover.&nbsp; I&#039;m experimenting with minidsp hardware and rePhase FIR generating software..It&#039;s been too windy for many days here to measure the whole box outside, so I&#039;ve been trying to tune the coax indoors.&nbsp; Maybe looking at impulse of each coax section doesn&#039;t make sense?This morning there was a lull in the wind, and I managed to get a quick measurement outside....damn it is so windy again...Here&#039;s a whole box impulse.&nbsp; Can you see things to address with impulse?[ATTACH]154596[/ATTACH]Here&#039;s transfer as well. This represents the first try on the mid section with minidsp...I can see work needs to be done with EQ, and the timing looks a little off between mid and coax.But on the whole I&#039;m happy as heck with tuning progress and sound.[ATTACH]154597[/ATTACH]</blockquote>

[QUOTE="Mark Wilkinson, post: 148841, member: 8989"] Re: 60 Degree DIY Mid Hi Thanks Peter, I'm not using the passive crossover. I'm experimenting with minidsp hardware and rePhase FIR generating software.. It's been too windy for many days here to measure the whole box outside, so I've been trying to tune the coax indoors. Maybe looking at impulse of each coax section doesn't make sense? This morning there was a lull in the wind, and I managed to get a quick measurement outside....damn it is so windy again... Here's a whole box impulse. Can you see things to address with impulse? [ATTACH=CONFIG]154596.vB5-legacyid=14346[/ATTACH] Here's transfer as well. This represents the first try on the mid section with minidsp...I can see work needs to be done with EQ, and the timing looks a little off between mid and coax. But on the whole I'm happy as heck with tuning progress and sound. [ATTACH=CONFIG]154597.vB5-legacyid=14347[/ATTACH] [/QUOTE]

Verification