Reply to thread

Message

<blockquote data-quote="Mark Wilkinson" data-source="post: 149082" data-attributes="member: 8989">Re: 60 Degree&nbsp; DIY Mid HiUpdate on rePhase / minidsp DIY60 tuning....Finally had a chance to see what latest settings look like outdoors...[ATTACH]154607[/ATTACH]This is no sub and a 48db LR at 100hz.&nbsp; Here&#039;s same DIY settings indoors, but on top a JTR OS sub using&nbsp; 48 db linear-phase LR @100hz (and @28 for HP.)Low end on DIY has something to tie phase to.... [ATTACH]154608[/ATTACH]&nbsp;Current goal is to see how low in freq I can get flat phase. Then to back off, and optimize phase flatness versus latency...Really, really, pleased with the sound !!!!While I was set up to test, I checked out a UPA-1P and a JTR 3TXFor grins...here they are...UPA-1p[ATTACH]154611[/ATTACH]3TX&nbsp; no HP filter[ATTACH]154610[/ATTACH]</blockquote>

[QUOTE="Mark Wilkinson, post: 149082, member: 8989"] Re: 60 Degree DIY Mid Hi Update on rePhase / minidsp DIY60 tuning.... Finally had a chance to see what latest settings look like outdoors... [ATTACH=CONFIG]154607.vB5-legacyid=14431[/ATTACH] This is no sub and a 48db LR at 100hz. Here's same DIY settings indoors, but on top a JTR OS sub using 48 db linear-phase LR @100hz (and @28 for HP.) Low end on DIY has something to tie phase to.... [ATTACH=CONFIG]154608.vB5-legacyid=14432[/ATTACH] Current goal is to see how low in freq I can get flat phase. Then to back off, and optimize phase flatness versus latency... Really, really, pleased with the sound !!!! While I was set up to test, I checked out a UPA-1P and a JTR 3TX For grins...here they are... UPA-1p [ATTACH=CONFIG]154611.vB5-legacyid=14435[/ATTACH] 3TX no HP filter [ATTACH=CONFIG]154610.vB5-legacyid=14434[/ATTACH] [/QUOTE]

Verification