Reply to thread

Message

<blockquote data-quote="Andy Turner" data-source="post: 203156" data-attributes="member: 10677">I have been reading this thread and the 90 degree version thread and have decided to build two 90 degree two way boxes. Thank you Peter Morris for sharing all that knowledge.What I find most interesting is the DSP things. The tools and methods I see used here are all new to me, but I am looking very much forward to get going.I have managed to collect all the hardware, so I am ready to make some saw dust.My wood working skills are limited, so I was hoping that someone would share their experience building the boxes.First question that pops to my mind is if anyone has built exactly according to Don&#039;s (thank you Don) plan: &#039;diy mid-high 8-6-15a&#039;?So it would be safe to cut all parts beforehand according to Don&#039;s plan? Or do you cut as you go along?Is there a good method of building? like for example a sequence of assembling the parts, and are you using just glue, or nails or screws?I have built four Xoc TH-18 tapped horn using screws and normal wood glue on all joints, which I think maybe is not necessary for this build?I am really looking forward to this project.Thank you all in advance.</blockquote>

[QUOTE="Andy Turner, post: 203156, member: 10677"] I have been reading this thread and the 90 degree version thread and have decided to build two 90 degree two way boxes. Thank you Peter Morris for sharing all that knowledge. What I find most interesting is the DSP things. The tools and methods I see used here are all new to me, but I am looking very much forward to get going. I have managed to collect all the hardware, so I am ready to make some saw dust. My wood working skills are limited, so I was hoping that someone would share their experience building the boxes. First question that pops to my mind is if anyone has built exactly according to Don's (thank you Don) plan: 'diy mid-high 8-6-15a'? So it would be safe to cut all parts beforehand according to Don's plan? Or do you cut as you go along? Is there a good method of building? like for example a sequence of assembling the parts, and are you using just glue, or nails or screws? I have built four Xoc TH-18 tapped horn using screws and normal wood glue on all joints, which I think maybe is not necessary for this build? I am really looking forward to this project. Thank you all in advance. [/QUOTE]

Verification