Reply to thread

Message

<blockquote data-quote="Mark Wilkinson" data-source="post: 203311" data-attributes="member: 8989">Hi again AndyI used the &#039;diy dbl 12.v1.md60&#039; plan,This plan should work great for the 90 degree. I would NOT expect it to work with the 60 degree unless you spend alot of time drafting/modeling ......knowing it will.My convertible box ended up 430mm external depth, and 380mm external width....( t think you accidentally went backwards above)FWIW, I would not make a convertible box again, way too much detail and custom mounting crap necessary,...and again in the case of basing it off of 90 degree plans...too tight with the 60 degree horn for any error .I&#039;m leaving my boxes in the 90 degree config, and beginning to build a new pair of 60&#039;s.I&#039;m going to make the 60 degrees wide enough to accommodate the 60 degree horn inside the side walls.I guess what I&#039;m really trying to recommend is if you want the 90, the 90 plans should work great.</blockquote>

[QUOTE="Mark Wilkinson, post: 203311, member: 8989"] Hi again Andy I used the 'diy dbl 12.v1.md60' plan, This plan should work great for the 90 degree. I would NOT expect it to work with the 60 degree unless you spend alot of time drafting/modeling ......knowing it will. My convertible box ended up 430mm external depth, and 380mm external width....( t think you accidentally went backwards above) FWIW, I would not make a convertible box again, way too much detail and custom mounting crap necessary,... and again in the case of basing it off of 90 degree plans...too tight with the 60 degree horn for any error . I'm leaving my boxes in the 90 degree config, and beginning to build a new pair of 60's. I'm going to make the 60 degrees wide enough to accommodate the 60 degree horn inside the side walls. I guess what I'm really trying to recommend is if you want the 90, the 90 plans should work great. [/QUOTE]

Verification