Log in
Register
Home
Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Low Earth Orbit
DIY Audio
60 Degree DIY Mid Hi - AKA PM60
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="Justin Abrahams" data-source="post: 206324" data-attributes="member: 8417"><p>Regarding horn mounting, it looks as though the plans are suggesting the XT1464 side mounting holes land right at the edge of the baffle/sidewall. Is there enough meat on the baffle at this area to prevent tear-out or have modifications to the box's width been made? Are you using threaded inserts here or using a different method? </p><p></p><p>Mark (and others who have built a removable/interchangeable horn/baffle system), if you are still willing to share those details (here or PM is fine. I can give you my email, if that's even easier), I'd love to learn as much info about it, as that is something I'm really looking forward to trying. </p><p></p><p>For those who have built most of the box (including sides) out of 15mm, where did you find the most benefit in bracing (aside from the standard top & bottom brace near the horn mouth and between the baffle exit and back of the enclosure? Im considering spacing two 13mm braces equally vs one 15mm down the middle. This would prevent cutting the bottom brace to clear the pole mount, but would that bracing be excessive?</p><p></p><p>I've been reading the mounds of valuable information in this thread from the sidelines for a while. And I can't thank you all enough for the wealth of knowledge you've shared. From design & flying ideas, to tuning, and next level hardware/software ideas and beyond. Thanks to those who have and continue to share — your willingness and selflessness don't go unnoticed. Cheers to you!</p><p></p><p>Justin</p></blockquote><p></p>
[QUOTE="Justin Abrahams, post: 206324, member: 8417"] Regarding horn mounting, it looks as though the plans are suggesting the XT1464 side mounting holes land right at the edge of the baffle/sidewall. Is there enough meat on the baffle at this area to prevent tear-out or have modifications to the box's width been made? Are you using threaded inserts here or using a different method? Mark (and others who have built a removable/interchangeable horn/baffle system), if you are still willing to share those details (here or PM is fine. I can give you my email, if that's even easier), I'd love to learn as much info about it, as that is something I'm really looking forward to trying. For those who have built most of the box (including sides) out of 15mm, where did you find the most benefit in bracing (aside from the standard top & bottom brace near the horn mouth and between the baffle exit and back of the enclosure? Im considering spacing two 13mm braces equally vs one 15mm down the middle. This would prevent cutting the bottom brace to clear the pole mount, but would that bracing be excessive? I've been reading the mounds of valuable information in this thread from the sidelines for a while. And I can't thank you all enough for the wealth of knowledge you've shared. From design & flying ideas, to tuning, and next level hardware/software ideas and beyond. Thanks to those who have and continue to share — your willingness and selflessness don't go unnoticed. Cheers to you! Justin [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Low Earth Orbit
DIY Audio
60 Degree DIY Mid Hi - AKA PM60
Top
Bottom
Sign-up
or
log in
to join the discussion today!