Normal
Today received the new driver and checked if there is enough clearance. In the original drawing of the PM90 the horn must move about 6mm to the front same as Peter mentioned in the PM90 post. My first idear was not to chanche the cabinet dimension and moving the horn a little to the front. I sended Peter van Gils the pictures i made and his suggestion was to extend the clearance between the woofers. I must say this would be the best solution. Below the pictures and the addapted drawing. To get enough clearence the woofers are moved 10mm extra. This will be for me now the basics starting point. The clearence between eacht nearest point to the woofers is about 5mm. (the woofers are in the correct angle on the pictures i made)[ATTACH=full]209269[/ATTACH][ATTACH=full]209270[/ATTACH]
Today received the new driver and checked if there is enough clearance. In the original drawing of the PM90 the horn must move about 6mm to the front same as Peter mentioned in the PM90 post. My first idear was not to chanche the cabinet dimension and moving the horn a little to the front. I sended Peter van Gils the pictures i made and his suggestion was to extend the clearance between the woofers. I must say this would be the best solution. Below the pictures and the addapted drawing. To get enough clearence the woofers are moved 10mm extra. This will be for me now the basics starting point. The clearence between eacht nearest point to the woofers is about 5mm. (the woofers are in the correct angle on the pictures i made)
[ATTACH=full]209269[/ATTACH]
[ATTACH=full]209270[/ATTACH]
