Reply to thread

Message

<blockquote data-quote="Jan Jaap Derksen" data-source="post: 214732" data-attributes="member: 14184">Hi guys. Due to the Covid lock down in our country i was not able to finalize the cabinets till now. Also a proper test i could not yet do.As you can see i build 2 cabinets with fully intergraded pascal xpro-2 amp (i bought this amp before i chanched over to the DCX464 <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f622.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":cry:" title="Crying&nbsp; &nbsp; :cry:"&nbsp; data-smilie="15"data-shortname=":cry:" /> otherwise it would be the xpro-3)and an additional dsp sound board with FIR filtering. Analog input and AES . I extend the cabinet at the back with 35mm to fit in all stuff.[ATTACH=full]209387[/ATTACH]The speakers are B&amp;C 12NDL76 16 ohm each and put these paralel to each other. I chose 16ohm to use the maximum power of the amp into the speakers and as you can see at the pictures i have made at the back side a speakon output for second slave cabinet. (to build in the futhure)The B&amp;C dcx464 i made a passive crossover at 4000hz. The exact weight of the cabinet is at the moment 38.89kg. This is pretty heavy but not as bad as i thought it will be.</blockquote>

[QUOTE="Jan Jaap Derksen, post: 214732, member: 14184"] Hi guys. Due to the Covid lock down in our country i was not able to finalize the cabinets till now. Also a proper test i could not yet do. As you can see i build 2 cabinets with fully intergraded pascal xpro-2 amp (i bought this amp before i chanched over to the DCX464 :cry: otherwise it would be the xpro-3)and an additional dsp sound board with FIR filtering. Analog input and AES . I extend the cabinet at the back with 35mm to fit in all stuff.[ATTACH type="full" width="204px" alt="1609327088422.png"]209387[/ATTACH] The speakers are B&C 12NDL76 16 ohm each and put these paralel to each other. I chose 16ohm to use the maximum power of the amp into the speakers and as you can see at the pictures i have made at the back side a speakon output for second slave cabinet. (to build in the futhure) The B&C dcx464 i made a passive crossover at 4000hz. The exact weight of the cabinet is at the moment 38.89kg. This is pretty heavy but not as bad as i thought it will be. [/QUOTE]

Verification