Normal
Re: Acoustic PredictionKip,I always set up a directional array by measuring in the direction where it is most clearly defined. For me, for a cardioid array, that is behind the array a reasonable distance. Line up the phase traces with delay and then invert polarity, boom, you're done. If you've set your driver spacing well and are not too close to boundaries everything should be good.
Re: Acoustic Prediction
Kip,
I always set up a directional array by measuring in the direction where it is most clearly defined. For me, for a cardioid array, that is behind the array a reasonable distance. Line up the phase traces with delay and then invert polarity, boom, you're done. If you've set your driver spacing well and are not too close to boundaries everything should be good.
