Reply to thread

Message

<blockquote data-quote="kristianjohnsen" data-source="post: 55795" data-attributes="member: 441">Re: Add a digital mixer to a analog mixerI seem to recall them making another device back when catalogues were made of paper, but can&#039;t recall what the name was.&nbsp; FWIW, I belive this is either the one I had in mind or it&#039;s younger sibling?<a href="http://www.behringer.com/EN/Products/CM8000.aspx" target="_blank">Behringer: CYBERMIX CM8000</a>I don&#039;t know what your needs are, but I have to say I am very happy with my remote pre setup with Behringer ADA 8000s modified with Appsys remote gain components that are controlled by MIDI over 100m cat5 <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /><a href="http://appsys.ch/en/products/remotegaincontroller" target="_blank">Remote Gain Controller</a>I use a Behringer BCR2000 to control the stage rack that houses the modified ADA8Ks.&nbsp; The MIDI data is wowen into the data stream that transports the digital audio to and from the stage/FOH.If all you need is to remote attenuate signals you could just use a long MIDI cable to remote control an AGC unit from Appsys and in turn use that to control the gain of some modified ADA8Ks.&nbsp; If you were to connect the ADAT output of the ADA8K to the ADAT input you end up with a mic/line IN/line OUT remotely controlled unit.Food for thought, perhaps?<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /></blockquote>

[QUOTE="kristianjohnsen, post: 55795, member: 441"] Re: Add a digital mixer to a analog mixer I seem to recall them making another device back when catalogues were made of paper, but can't recall what the name was. FWIW, I belive this is either the one I had in mind or it's younger sibling? [url=http://www.behringer.com/EN/Products/CM8000.aspx]Behringer: CYBERMIX CM8000[/url] I don't know what your needs are, but I have to say I am very happy with my remote pre setup with Behringer ADA 8000s modified with Appsys remote gain components that are controlled by MIDI over 100m cat5 :) [url=http://appsys.ch/en/products/remotegaincontroller]Remote Gain Controller[/url] I use a Behringer BCR2000 to control the stage rack that houses the modified ADA8Ks. The MIDI data is wowen into the data stream that transports the digital audio to and from the stage/FOH. If all you need is to remote attenuate signals you could just use a long MIDI cable to remote control an AGC unit from Appsys and in turn use that to control the gain of some modified ADA8Ks. If you were to connect the ADAT output of the ADA8K to the ADAT input you end up with a mic/line IN/line OUT remotely controlled unit. Food for thought, perhaps?:) [/QUOTE]

Verification