Reply to thread

Message

<blockquote data-quote="Douglas R. Allen" data-source="post: 146828" data-attributes="member: 71">Re: Airfader to O1v96 with Windows tablet for wireless mixingTried something tonight that worked well so I wanted to share.If you ever wanted a &quot;wired&quot; connection from the O1v96 to your Windows server via AirFader but the usb length limit wasn&#039;t enough to get the job done this I found worked for me.I went out of my mixers USB send into the Usb in on my router setup by it. Went Ethernet out on the router to my IBM tablet running windows via cat5. The tablet connected to the router. I was able to open the USB connection and connect to the board via the ethernet connection. This gave me full Airfader control of the desk.In basic terms the router became a USB to Ethernet adapter.&nbsp; I tried it with a 50 and 30 foot cat5 cable coupled for an 80 foot total length and it worked fine. I could at the same time connect my RCA (android) tablet to the router as well and run the airfader program wireless.With this setup I can have the desk set up on side of the stage with a cat5 cable to the back of the room hardwired to the Windows tablet and&nbsp; have a Android/ipad setup for wireless mixing where needed.Just wanted to add the flexibility to the setup I found to work well.</blockquote>

[QUOTE="Douglas R. Allen, post: 146828, member: 71"] Re: Airfader to O1v96 with Windows tablet for wireless mixing Tried something tonight that worked well so I wanted to share. If you ever wanted a "wired" connection from the O1v96 to your Windows server via AirFader but the usb length limit wasn't enough to get the job done this I found worked for me. I went out of my mixers USB send into the Usb in on my router setup by it. Went Ethernet out on the router to my IBM tablet running windows via cat5. The tablet connected to the router. I was able to open the USB connection and connect to the board via the ethernet connection. This gave me full Airfader control of the desk. In basic terms the router became a USB to Ethernet adapter. I tried it with a 50 and 30 foot cat5 cable coupled for an 80 foot total length and it worked fine. I could at the same time connect my RCA (android) tablet to the router as well and run the airfader program wireless. With this setup I can have the desk set up on side of the stage with a cat5 cable to the back of the room hardwired to the Windows tablet and have a Android/ipad setup for wireless mixing where needed. Just wanted to add the flexibility to the setup I found to work well. [/QUOTE]

Verification