Reply to thread

Message

<blockquote data-quote="Helge A. Bentsen" data-source="post: 58473" data-attributes="member: 263">Re: amp reconfirgure mode - what to do...I&#039;ve never found any difference in performance on FP10000q running them in sub-only or multi-way setups. But I&#039;ve never done a direct comparison either, someone else might have done that. Also keep in mind that I don&#039;t go below 4 ohm unless I really have to or the amp really is capable. 4xSB1000z on a FP10k is no problem IMHO <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />I got two FP6000q in that rack powered off a single 16A/230V socket along with a UX8800. Never popped a breaker.I tested FP6000Q and FP10000Q with LM26 and PLM14000Q on my SH-50s when I researched amps for them. I ended up with PLM on them because they have sufficient headroom IMHO, on-board processing and better performance below 4 ohms (Handy when you need it). Can&#039;t say I noticed any differences in sonic qualities between them.</blockquote>

[QUOTE="Helge A. Bentsen, post: 58473, member: 263"] Re: amp reconfirgure mode - what to do... I've never found any difference in performance on FP10000q running them in sub-only or multi-way setups. But I've never done a direct comparison either, someone else might have done that. Also keep in mind that I don't go below 4 ohm unless I really have to or the amp really is capable. 4xSB1000z on a FP10k is no problem IMHO :) I got two FP6000q in that rack powered off a single 16A/230V socket along with a UX8800. Never popped a breaker. I tested FP6000Q and FP10000Q with LM26 and PLM14000Q on my SH-50s when I researched amps for them. I ended up with PLM on them because they have sufficient headroom IMHO, on-board processing and better performance below 4 ohms (Handy when you need it). Can't say I noticed any differences in sonic qualities between them. [/QUOTE]

Verification