Behringer Dual wing setup, HELP!!

George Wirges

New member
May 22, 2021
3
2
3
61
USA
Here's my problem, I'm installing a pair of Behringer Wing consoles with appropriate stage boxes in a local church, I have one console set as internal clock while all other devices are on AES50A Clock. I plug a source into 1 of the stage boxes and I can rout the signal in both consoles, so far so good. Now when I adjust the fader on console #1 , it also affects the level on console #2. But when I adjust the fader on console #2, it does NOT affect console #1. I nned these consoles to operate independently, (FOH & MON) what am I missing?

Thanks in advance for any help you can give.

George
 
I had both wings looking to aes50a inputs. This is how I started.......
Wing 1>AES50A>Stagebox A>Stagebox B>Wing 2 A

Tried to look at the stage box as a source on both consoles, when I changed it to this......
Wing 1>AES50A>Stagebox A
Wing 1>AES50B>Wing 2 A and set the wing 2 to look to the OUTPUTS of wing 1 it all came together.
 
  • Like
Reactions: Tim McCulloch