Log in
Register
Home
Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Pro Audio
Junior Varsity
behringer x32 configuration x control
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="Joe Sanborn" data-source="post: 84577" data-attributes="member: 2062"><p>Re: behringer x32 configuration x control</p><p></p><p></p><p></p><p>Hi Carlos,</p><p></p><p>Below are instructions to set up XControl as well as XiControl.</p><p></p><p><strong>X Control Setup:</strong></p><p>1. Download the latest version of Xcontrol from <a href="http://www.behringer.com/x32" target="_blank">Behringer: DIGITAL MIXER X32</a>. </p><p>2. Connect the X32 “Ethernet” jack to a wireless router (for wireless use), or directly to your computer's Ethernet port.</p><p>3. Open your computer's Network Settings and connect to the wireless network, or verify your wired Ethernet connection is enabled when using a direct Ethernet connection.</p><p>4. On your computer, launch the XControl app and take note of the computer's IP address.</p><p>5. On the X32, press the SETUP button and page over to the "network" tab.</p><p>6. For IP address use the Computer's IP address noted in step 4 above <strong>EXCEPT </strong>change the last number. Next set the subnet mask to 255.255.255.0.</p><p>7. The gateway field can often be left blank. If using a router, fill it in with the router's' IP address if you are having trouble connecting.</p><p>8. On your computer, input the X32's IP address into XControl and click Connect.</p><p></p><p></p><p></p><p></p><p><strong>Xi Control Setup:</strong></p><p>1. Download the Xi Control app for free from the Apple App Store. </p><p>2. .Connect the X32 “Ethernet” jack to an available port on a wireless router (NOT the WAN / Internet port). </p><p>3. On your iPad, open the Wi-Fi settings and connect to the wireless router. </p><p>4. Launch Xi Control and take note of the IP address of your iPad. For this example, let's say it's 192.168.1.2 </p><p>5. On the X32, press the SETUP button and page over to the "network" tab.</p><p>6. For IP address use the iPad's IP address noted in step 4 above <strong>EXCEPT </strong>change the last number. For this example, try 192.168.1.5</p><p>7. Next set the subnet mask to 255.255.255.0. </p><p>8. The gateway field can often be left blank, but fill it in with your router's IP address if you are having trouble. </p><p>9. On the iPad, enter the IP address for your X32 and tap connect.</p><p></p><p>I hope it helps!</p><p></p><p></p><p>Best Regards,</p><p>Joe Sanborn</p><p>Manager, Channel Marketing</p><p>MUSIC Group</p><p>BEHRINGER</p></blockquote><p></p>
[QUOTE="Joe Sanborn, post: 84577, member: 2062"] Re: behringer x32 configuration x control Hi Carlos, Below are instructions to set up XControl as well as XiControl. [B]X Control Setup:[/B] 1. Download the latest version of Xcontrol from [url=http://www.behringer.com/x32]Behringer: DIGITAL MIXER X32[/url]. 2. Connect the X32 “Ethernet” jack to a wireless router (for wireless use), or directly to your computer's Ethernet port. 3. Open your computer's Network Settings and connect to the wireless network, or verify your wired Ethernet connection is enabled when using a direct Ethernet connection. 4. On your computer, launch the XControl app and take note of the computer's IP address. 5. On the X32, press the SETUP button and page over to the "network" tab. 6. For IP address use the Computer's IP address noted in step 4 above [B]EXCEPT [/B]change the last number. Next set the subnet mask to 255.255.255.0. 7. The gateway field can often be left blank. If using a router, fill it in with the router's' IP address if you are having trouble connecting. 8. On your computer, input the X32's IP address into XControl and click Connect. [B]Xi Control Setup:[/B] 1. Download the Xi Control app for free from the Apple App Store. 2. .Connect the X32 “Ethernet” jack to an available port on a wireless router (NOT the WAN / Internet port). 3. On your iPad, open the Wi-Fi settings and connect to the wireless router. 4. Launch Xi Control and take note of the IP address of your iPad. For this example, let's say it's 192.168.1.2 5. On the X32, press the SETUP button and page over to the "network" tab. 6. For IP address use the iPad's IP address noted in step 4 above [B]EXCEPT [/B]change the last number. For this example, try 192.168.1.5 7. Next set the subnet mask to 255.255.255.0. 8. The gateway field can often be left blank, but fill it in with your router's IP address if you are having trouble. 9. On the iPad, enter the IP address for your X32 and tap connect. I hope it helps! Best Regards, Joe Sanborn Manager, Channel Marketing MUSIC Group BEHRINGER [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Pro Audio
Junior Varsity
behringer x32 configuration x control
Top
Bottom
Sign-up
or
log in
to join the discussion today!