Reply to thread

Message

<blockquote data-quote="Mike Caldwell" data-source="post: 73746" data-attributes="member: 170">Re: Budget earset mics -&nbsp; AT to Shure adapter cableI made up a AT Hirose to TA4M adapter cable so I could plug a Shure wired TA4F mic directly in. There would have been no room to include the little board in the Pyle mic&#039;s connector inside a Hirose connector. Having the adapter cables will be handy anyway.I got the connectors from Markertek as well as some small cable to make them up with.<a href="http://www.markertek.com/Connectors-Adapters/Video-Connectors/4-Pin-EIAJ-Camera-Connectors/Hirose-Electric-USA-Inc/HR10A-7P-4S-73.xhtml" target="_blank">Hirose Electric USA, Inc. Hirose HR10A-7P-4S 4-Pin Female Push-Pull Connector with 7mm Male Shell 4-Pin EIAJ Camera Connectors at Markertek.com</a><a href="http://www.markertek.com/Connectors-Adapters/Audio-Connectors/XLR-Connectors/Switchcraft-Corporation/TA4M.xhtml" target="_blank">Switchcraft Corporation Switchcraft TA4MX Tini Q-G Miniature Connector Straight Male Cord Plug XLR Connectors at Markertek.com</a><a href="http://www.markertek.com/Cables/Bulk-Wire-Cable/Bulk-Audio-Cable/Mogami-Wire-Cable-Corp/2697.xhtml" target="_blank">Mogami Wire &amp; Cable Corp. Mogami W2697 Miniature Balanced / Lavalier Microphone Cable Bulk Audio Cable at Markertek.com</a>I used some heat shrink on the cable at the connector ends to size it up a little to fit the connector boots better.Attached is a scan of the pin outs and connections....yes it was hand drawn with a sharpie!Let me know if you have any questions.I still have not passed final judgment on getting any more of the Pyle mics. I can get one to sound decent but I&#039;m wondering what they would be like with four or five open at one time on a stage.</blockquote>

[QUOTE="Mike Caldwell, post: 73746, member: 170"] Re: Budget earset mics - AT to Shure adapter cable I made up a AT Hirose to TA4M adapter cable so I could plug a Shure wired TA4F mic directly in. There would have been no room to include the little board in the Pyle mic's connector inside a Hirose connector. Having the adapter cables will be handy anyway. I got the connectors from Markertek as well as some small cable to make them up with. [url=http://www.markertek.com/Connectors-Adapters/Video-Connectors/4-Pin-EIAJ-Camera-Connectors/Hirose-Electric-USA-Inc/HR10A-7P-4S-73.xhtml]Hirose Electric USA, Inc. Hirose HR10A-7P-4S 4-Pin Female Push-Pull Connector with 7mm Male Shell 4-Pin EIAJ Camera Connectors at Markertek.com[/url] [url=http://www.markertek.com/Connectors-Adapters/Audio-Connectors/XLR-Connectors/Switchcraft-Corporation/TA4M.xhtml]Switchcraft Corporation Switchcraft TA4MX Tini Q-G Miniature Connector Straight Male Cord Plug XLR Connectors at Markertek.com[/url] [url=http://www.markertek.com/Cables/Bulk-Wire-Cable/Bulk-Audio-Cable/Mogami-Wire-Cable-Corp/2697.xhtml]Mogami Wire & Cable Corp. Mogami W2697 Miniature Balanced / Lavalier Microphone Cable Bulk Audio Cable at Markertek.com[/url] I used some heat shrink on the cable at the connector ends to size it up a little to fit the connector boots better. Attached is a scan of the pin outs and connections....yes it was hand drawn with a sharpie! Let me know if you have any questions. I still have not passed final judgment on getting any more of the Pyle mics. I can get one to sound decent but I'm wondering what they would be like with four or five open at one time on a stage. [/QUOTE]

Verification