Reply to thread

Message

<blockquote data-quote="andrew gissing" data-source="post: 91428" data-attributes="member: 75">Re: Cat 5/6 multicore sources ?I&#039;ve got a price in pounds; i&#039;m hoping to get a USD price on this product - should be cheaper and also, oz dollar fares better on the USD than pound.The AES50 spec is basically 24ch at 96 K in both directions per cable. However that doesn&#039;t mean you can get 48ch in one direction. I&#039;ve also discovered that midas spread the control information across multiple cables. At a recent gig I only needed 22ch from stage and 9 outputs so I ran one cable and everything was working.. except.. mic pre levels would not change. Dial it on the console but nothing changed at all. Audio was still passing though. Install second cable and hey presto, works. That was just a further prompt for me to get a multicore cable.- forgot to add: AES50 at 48K for behringer means 48ch in each direction; I don&#039;t know about control info though...andrew</blockquote>

[QUOTE="andrew gissing, post: 91428, member: 75"] Re: Cat 5/6 multicore sources ? I've got a price in pounds; i'm hoping to get a USD price on this product - should be cheaper and also, oz dollar fares better on the USD than pound. The AES50 spec is basically 24ch at 96 K in both directions per cable. However that doesn't mean you can get 48ch in one direction. I've also discovered that midas spread the control information across multiple cables. At a recent gig I only needed 22ch from stage and 9 outputs so I ran one cable and everything was working.. except.. mic pre levels would not change. Dial it on the console but nothing changed at all. Audio was still passing though. Install second cable and hey presto, works. That was just a further prompt for me to get a multicore cable. - forgot to add: AES50 at 48K for behringer means 48ch in each direction; I don't know about control info though... andrew [/QUOTE]

Verification