Normal
Re: Coaxial Wedge CollaborationI have 8 monitors using the 10CX and a Paudio HF driver that are quite mind blowing IMO. They obviously don't have the output of the B&C and BMS drivers but work well within their limitations. I have them powered at about 300w each and HPF'd at 100Hz - even use them for bass monitors (usually a pair) for ampless situations no prob (the backwash from the subs fills in the low end nicely). They have passive crossovers that were designed for minimum feedback (no peaks, only dips) rather than maximal flatness.
Re: Coaxial Wedge Collaboration
I have 8 monitors using the 10CX and a Paudio HF driver that are quite mind blowing IMO. They obviously don't have the output of the B&C and BMS drivers but work well within their limitations. I have them powered at about 300w each and HPF'd at 100Hz - even use them for bass monitors (usually a pair) for ampless situations no prob (the backwash from the subs fills in the low end nicely). They have passive crossovers that were designed for minimum feedback (no peaks, only dips) rather than maximal flatness.
